Abstract
The force effect on the guide elements of the forging and pressing equipment of transverse forces is considered, taking into account the accompanying factors—gaps in the guides of the equipment and the eccentricity of the applied load that occur when performing metal forming operations. The method of modeling of the system, the stages of creating of a model are presented, the results of research are given, the main conclusions and recommendations are given, taking into account which will improve the quality of products obtained by forming operations and improve the performance of forging and pressing equipment and the tools used on it.
REFERENCES
Kuznetsov, S.V., Theoretical determination of transverse forces occurring in injection machining operations, Intellekt. Sist. Proizvod., 2013, no. 2, pp. 66–69.
Kuznetsov, S.V., Influence of cross-section forces on quality of the details received by methods of a sheet-metal forming, Tr. Nizhegorodsk. Gos. Tekh. Univ. im. R.E. Alekseeva, 2014, no. 5, pp. 438–442. https://www.nntu.ru/frontend/web/ngtu/files/nauka/ izdaniya/trudy/2014/05/438-442.pdf.
Kuznetsov, S.V., Research of cross-section forces at performance of technological operations of processing of metals by pressure, Tr. Nizhegorodsk. Gos. Tekh. Univ. im. R.E. Alekseeva, 2010, no. 2, pp. 92–97.
Travin, V.Yu., Technological strength and the pressure at the bottom of the die forging rotationally symmetric body, Izv. Tulsk. Gos. Univ. Tekh. Nauki, 2015, no. 7-1, pp. 127–133. https://elibrary.ru/item.asp?id=25070415.
Gol’nik, E.R. and Dibner, Yu.A., Expert planning of crank press decomposition and setting of local design and technological tasks, Kuznechno-Shtampovochnoe Proizvod.–Obrab. Mater. Davleniem, 2001, no. 1, pp. 40–44.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by V. Tereshchenko
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kuznetsov, S.V., Ivanov, S.V. & Anosova, E.S. Quantitative and Qualitative Assessments of the Forces Influence on the Press Equipment Guiding Elements. Russ. Engin. Res. 44, 10–13 (2024). https://doi.org/10.3103/S1068798X24010210
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24010210