Abstract
A new metal-cutting tool is developed—reamer-broacher, which improves the cutting process by minimizing adverse factors. By theoretical and experimental studies the regularities of the influence of cutting modes on the quality of processing with the subject tool are established.
REFERENCES
Zheleznov, G.S. and Shirokov, A.V., Hole accuracy in reaming, Russ. Eng. Res., 2023, vol. 43, no. 3, pp. 223–225. https://doi.org/10.3103/S1068798X23040378
Solov’ev, A.I. and Dzhafarova, Sh.I., Elaborating and making rational decisions in designing process operations of machining of a group of holes, Nauka Obraz., 2015, no. 12, pp. 11–25. https://doi.org/10.7463/1215.0828380
Chikhacheva, N.Yu., Shchedrin, A.V., Nikiforov, I.A., et al., Tribological structural-parametric analysis of the methods of combined hole blinding, Sborka Mashinostr., Priborostr., 2022, no. 8, pp. 370–380. https://doi.org/10.36652/0202-3350-2022-23-8-370-380
Yevtushenko, T.L., Kasenov, A.Zh., Musina, Zh.K., et al., Analysis of rotary cutter structure, Russ. Eng. Res., 2022, vol. 42, no. S1, pp. S70–S73. https://doi.org/10.3103/S1068798X23010070
Denchik, A.I., Kassenov, A.Zh., Yanyushkin, A.S., et al., Determining the accuracy of a product’s final dimension by simulation, Russ. Eng. Res., 2022, vol. 42, no. 12, pp. 1283–1287. https://doi.org/10.3103/S1068798X22120115
Baranov, A.V., Optimization of blade machining of holes on the basis of energy criteria, Vestn. Mashinostr., 2011, no. 3, pp. 47–50.
Barzov, A.A., Denchik, A.I., Musina, Zh.K., et al., Development of analytical model of probable formation of accuracy of executive size taking into account the influence of the scale factor, Sci. Technol. Kaz., 2021, no. 1, pp. 19–29.
Denchik, A.I., Kasenov, A.Z., Yanyushkin, A.S., et al., Simulation in establishing the dimensional precision of machine parts, Russ. Eng. Res., 2023, vol. 43, no. 9, pp. 1075–1081. https://doi.org/10.3103/S1068798X23090095
Yevtushenko, T.L., Kassenov, A.Z., Mussina, Z.K., et al., Peakless rotary cutter design for finish turning, Lecture Notes Mech. Eng., 2023, pp. 915–924. https://doi.org/10.1007/978-3-031-14125-6_89
Mukanov, R.B., Bykov, P.O., Taskarina, A.Zh., et al., Face turning of holes, Russ. Eng. Res., 2019, vol. 39, no. 1, pp. 75–78. https://doi.org/10.3103/s1068798x19010064
Kasenov, A.Z., Abishev, K.K., Mazdubay, A.V., et al., Broach for cylindrical holes and slots, Russ. Eng. Res., 2022, vol. 42, no. 7, pp. 698–700. https://doi.org/10.3103/S1068798X22070140
Kasenov, A.Z., Abishev, K.K., Yanyushkin, A.S., et al., Research of the stress-strain state of holes with new broach designs, News Nat. Acad. Sci. Repub. Kaz.: Ser. Geol. Tech. Sci., 2022, vol. 2, no. 452, pp. 89–103. https://doi.org/10.32014/2022.2518-170X.162
Kasenov, A.Zh., Formation of a hole surface roughness processed with broaching sweep, Sci. Technol. Kaz., 2011, nos. 3–4, pp. 46–49.
ACKNOWLEDGMENTS
The author expresses gratitude to K. Abishev, G. Itybayeva, and A. Taskarina for preparing and collecting materials for publication.
Funding
This work was carried out within the framework of grant financing of scientific and (or) scientific and technical projects for 2023–2025 under the project IRN AP19678887 “Research of tribotechnical characteristics of resource and energy saving metal-cutting tools,” financed by the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The author of this work declares that he has no conflicts of interest.
Additional information
Translated by V. Tereshchenko
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kassenov, A.Z. Theoretical and Experimental Studies of Hole Processing by Reamer-Broacher. Russ. Engin. Res. 44, 42–45 (2024). https://doi.org/10.3103/S1068798X24010167
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24010167