Abstract
Borehole sucker rods used in oil production operate in challenging conditions. In particular, they are subject to dynamic forces, corrosive media, and various types of deformation. There is an elevated probability that the rod will fracture and the attached equipment will plunge to the bottom of the borehole, with consequent loss of output and the need for maintenance and repair. A promising means of improving rod reliability is to treat the working surface with high-frequency current. The possibility of design improvements in the heat treatment system for borehole sucker rods is considered.
REFERENCES
Babaev, S.G., Kershenbaum, V.Ya., and Gabibov, I.A., Evolyutsiya kachestva tribosopryazhenii neftegazovoi tekhniki (Quality Evolution of Tribo-Conjugations of Oil and Gas Equipment), Moscow: Nats. Inst. Nefti Gaza, 2018.
Babaev, S.G. and Gabibov, I.A., Problemy kachestva, nadezhnosti i tekhnologichnosti neftegazopromyslovogo oborudovaniya (Problems of Quality, Reliability and Manufacturability of Oil and Gas Field Equipment), Baku: Azerb. State Oil Ind. Univ., 2022.
Guseinov, G.G., Accelerated technology and mechanisms used to eliminate accidents in wells, Neftepromysl. Delo, 2012, no. 8, pp. 36–38.
Aliev, E.A., Mamedov, I.I., and Akhmedov, A.N., Patent AR I 2017 0042.
Aliev, E.A., Habibov, I.A., and Salimov, Z.E., Surface-recognition algorithm for capture of rod workpieces, Russ. Eng. Res., 2022, vol. 42, pp. 773–775. https://doi.org/10.3103/S1068798X2208007X
Aliev, E.A. and Habibov, I.A., Hardening of rods by high-frequency current, Russ. Eng. Res., 2022, vol. 42, pp. 1120–1124. https://doi.org/10.3103/S1068798X2211003X
Aliev, E.A., History of the thermal installation processing sucker rods, Oborud. Tekhnol. Mater., 2020, no. 1 (3), pp. 63–68.
Aliev, E.A., The way of improving benches for processing pump rods, Vestn. Mashinostr., 2021, no. 2, pp. 87–88. https://doi.org/10.36652/0042-4633-2021-2-87-88
Aliev, E.A. and Gabibov, I.A., Development of a unit for surface hardening of sucker rods, Uprochnyayushchie Tekhnol. Pokrytiya, 2022, no. 1, pp. 28–30.
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Aliyev, E.A., Habibov, I.A. Improving a System for Heat Treatment of Borehole Sucker Rods. Russ. Engin. Res. 43, 1528–1530 (2023). https://doi.org/10.3103/S1068798X23120055
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23120055