Abstract
A method is proposed for determining the operating speed of a reciprocating compressor with regenerative heat transfer in pump mode, when the operating speed of the machine in compressor mode is known. The mathematical models are based on fundamental laws of energy and mass conservation, the equations of motion, and the equations of state. The operating speed of the machine in pump mode is determined on the basis that the maximum pressure losses when the machine operates in pump and compressor modes are the same and the relative energy losses are equal.
REFERENCES
Shcherba, V.E., Bolshtyanskii, A.P., Kaigorodov, S.Yu., and Kuzeeva, D.A., Benefits of integrating displacement pumps and compressors, Russ. Eng. Res., 2016, vol. 36, no. 3, pp. 174–178. https://doi.org/10.3103/S1068798X1603014X
Shcherba, V.E., Bolshtyanskii, A.P., Shalai, V.V., and Khodyreva, E.V., Nasos-kompressory. Rabochie protsessy i osnovy proektirovaniya (Pump-Compressors. Operating Processes and Design Fundamentals), Moscow: Mashinostroenie, 2013.
Shcherba, V.E., Bolshtyanskii, A.P., Rybak, A.T., Nosov, E.Yu., and Tegzhanov, A.S., Constructive schemes of hybrid machines of volumetric action, Omsk. Nauchn. Vestn., 2018, no. 1 (157), pp. 10–18.
Shcherba, V., Shalay, V., Nosov, E., Pavlyuchenko, E., and Tegzhanov, A.-Kh., Development and research of crosshead-free piston hybrid power machine, Machines, 2021, vol. 9, no. 2, p. 32. https://doi.org/10.3390/machines9020032
RF Patent 2763099.
USSR Inventor’s Certificate no. 1079882.
Plastinin, P.I., Porshnevye kompressory (Piston Compressor), Moscow: Kolos, 2000, vol. 1.
Fotin, B.S., Pirumov, I.B., Prilutskii, I.K., and Plastinin, P.I., Porshnevye kompressory: Uchebnoe posobie dlya studentov vuzov (Piston Compressors: Manual for University Students), Fotin, B.S., Ed., Leningrad: Mashinostroenie, 1987.
Frenkel’, M.I., Porshnevye kompressory (Piston Compressors), Leningrad: Mashinostroenie, 1969.
Shcherba, V.E., Shalai, V.V., Pavlyuchenko, E.A., Khodareva, E.V., and Grigoriev, A.V., Thermodynamic foundations for the analysis of processes compression and expansion in a positive-displacement pump, Chem. Pet. Eng., 2015, vol. 51, nos. 3–4, pp. 183–187. https://doi.org/10.1007/s10556-015-0021-4
Shcherba, V.E., Comparative analysis of methods for calculating the discharge process in a positive-displacement pump, Chem. Pet. Eng., 2022, vol. 57, nos. 11–12, pp. 952–962. https://doi.org/10.1007/s10556-022-01030-2
Shcherba, V.E., Shalai, V.V., Grigoriev, A.V., Khodoreva, E.V., and Pavlyuchenko, E.A., A generalized thermodynamic approach to the calculation of processes of suction and discharge in positive-displacement pumps and compressors, Chem. Pet. Eng., 2015, vol. 51, no. 6, pp. 408–413. https://doi.org/10.1007/s10556-015-0060-x
Shcherba, V.E., Shalai, V.V., Kondyurin, A.Yu., Ov-syannikov, A.Yu., Dorofeev, E.A., and Kryukov, K.S., Influence of deformation, mass transfer, and heating on pump compression, Russ. Eng. Res., 2019, vol. 39, no. 1, pp. 1–5. https://doi.org/10.3103/S1068798X19010210
Shcherba, V.E., Shalai, V.V., Aver’yanov, G.S., Kalekin, V.S., and Korneev, S.V., Equations of relative pressure losses in processes of suction and injection of piston pump, Adv. Eng. Res., 2018, vol. 158, pp. 356–359. https://doi.org/10.2991/avent-18.2018.69
Al’tshul’, A.D. and Kiselev, P.G., Gidravlika i aerodinamika (Hydraulics and Aerodynamics), Moscow: Stroiizdat, 1975.
Funding
Financial support was provided by the Russian Science Fund (grant 22-29-00399).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The author declares that he has no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Shcherba, V.E. Operating Speeds of a Hybrid Reciprocating Power Unit in Compressor and Pump Modes. Russ. Engin. Res. 43, 914–921 (2023). https://doi.org/10.3103/S1068798X23080300
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23080300