Abstract
A method is proposed for determining the machining error at the end surfaces of axial compressor components. In investigating the source of the error, the cutting forces and tool wear are taken into account.
REFERENCES
Nesterenko, G.A., Nesterenko, I. S., and Orlov, A.A., Calculation of the deflection of the blade of the disk of an axial gas pumping machine, Vestn. Mashinostr., 2022, no. 11, pp. 64–65. https://doi.org/10.36652/0042-4633-2022-11-64-65
Obrabotka rezaniem vysokoprochnykh, korrozionnostoikikh i zharoprochnykh stalei (Machining of High-Strength, Corrosion-Resistant and Heat-Resistant Steels), Petrukha, P.G., Ed., Moscow: Mashinostroenie, 1980.
Vivdenko, Yu.N., Effect of tool wear on the accuracy of turning non-rigid parts made of high-strength materials, in Optimizatsiya protsessov rezaniya zharo- i osoboprochnykh materialov (Optimization of Cutting Processes for Heat- and High-Strength Materials), Ufa: Ufimsk. Aviats. Inst., 1986, pp. 134–140.
Reznikov, A.N., Teplofizika rezaniya (Thermophysics of Cutting), Moscow: Mashinostroenie, 1969.
Spravochnik tekhnologa-mahsinostroitelya (Handbook of Technologist–Machine Engineer), Kosilova, A.G. and Meshcheryakov, R.K., Eds., Moscow: Mashinostroenie, 1985, vol. 2.
Kushner, V.S., Termomekhanicheskaya teoriya protsessa nepreryvnogo rezaniya plastichnykh materialov (Thermomechanical Theory of Continuous Cutting of Plastic Materials), Irkutsk: Irkutsk Univ., 1982.
Podgornyi, A.N., Marchenko, G.A., and Pustynni-kov, V.I., Osnovy i metody teorii uprugosti (Fundamentals and Methods of Elasticity Theory), Kiev: Vysshaya Shkola, 1981.
Nesterenko, G.A. and Nesterenko, I.S., Calculation-experimental method of determining the propensity for warping non-rigid disks of hydraulic machine, Proc. 3rd Int. Conf. on Dynamics and Vibroacoustics of Machines, 2016, p. 278.
Nesterenko, G.A., Nesterenko, I.S., and Lysenko, E.A., Accuracy forecasting disks manufacturing of axial power machines considering the forces at the industrial process system, Procedia Eng., 2016, vol. 152, pp. 487–492.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Nesterenko, G.A., Nesterenko, I.S. Influence of Machining Parameters on the Precision of an Axial Compressor Disk. Russ. Engin. Res. 43, 955–957 (2023). https://doi.org/10.3103/S1068798X23080191
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23080191