Abstract
On the basis of numerical and laboratory experiments regarding the milling of composites, semiempirical formulas are proposed to identify the best machining conditions and ensure the required surface quality.
REFERENCES
Polimernye kompozitsionnye materialy: Svoistva, Struktura, Tekhnologii (Polymer Composite Materials: Properties, Structure, Technologies), Berlin, A.A., Ed., St. Petersburg: Professiya, 2009.
Yaroslavtsev, V.M., Highly efficient processing technologies for composite products, Nauka Obraz.: Nauchn. Izd. MGTU im. N.E. Baumana, 2012, no. 4. https://doi.org/10.7463/0412.0361759
Markov, A.M., Technological features of machining of parts from composite materials, Naukoem. Tekhnol. Mashinostr., 2014, no. 7, pp. 3–5.
Yushchenko, D.A. and Lobanov, D.V., Methods of blade machining of products from composite materials their specificity and prospects, Tekhnol. Mater., 2015, no. 3, pp. 30–35.
Potapov, M.S. and Vinogradov, D.V., Overview of milling cutters with curved cutting edge, Nauka Obraz.: Nauchn. Izd. MGTU im. N.E. Baumana, 2014, no. 11. https://doi.org/10.7463/1114.0740472
Yaroslavtsev, V.M., Obrabotka rezaniem polimernykh kompozitsionnykh materialov: Uchebnoe posobie (Cutting of Polymer Composite Materials: Manual), Moscow: Bauman Moscow State Tech. Univ., 2012.
Kablov, E.N., Composites: Today and tomorrow, Met. Evrazii, 2015, no. 1, pp. 36–39.
Kablov, E.N., Innovative developments of FSUE “VIAM” SSC of RF on realization of “Strategic directions of the development of materials and technologies of their processing for the period until 2030”, Aviats. Mater. Tekhnol., 2015, no. 1 (34), pp. 3–33. https://doi.org/10.18577/2071-9140-2015-0-1-3-33
Kartashov, A.B., Mechanical processing of composites. www.bmstu.ru/ps/kartashov/fileman/download/ПKM2017. Accessed June 25, 2021.
Raskutin, A.E., Khrul’kov, A.V., and Girsh, R.I., Technological features of composite materials machining in manufacturing details of structures (review), Tr. VIAM, 2016, no. 9 (45), p. 12. https://doi.org/10.18577/2307-6046-2016-0-9-12-12. http://viam-works.ru. Accessed June 25, 2021.
Meshkas, A.E., Makarov, V.F., and Shirinkin, V.V., Technology improves the processing of composite materials by milling, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2016, no. 8-2, pp. 291–299.
Yushchenko, D.A. and Lobanov, D.V., Methods of blade machining of products from composite materials their specificity and prospects, Tekhnol. Mater., 2015, no. 3, pp. 30–35.
Markov, A.M., Technological features of machining of parts from composite materials, Naukoem. Tekhnol. Mashinostr., 2014, no. 7, pp. 3–5.
Yaroslavtsev, V.M., Revisiting the possibility of high-speed polymer composite processing, Vestn. MGTU im. N.E. Baumana. Ser. Mashinostr., 2015, no. 3 (102), pp. 59–70. https://doi.org/10.18698/0236-3941-2015-3-59-70
Sturov, A.A. and Chashchin, N.S., Machining composite material by a robotic complex based on KUKA KR210 robot, Vestn. Irkutsk. Gos. Tekh. Univ., 2019, vol. 23, no. 4, pp. 743–750. https://doi.org/10.21285/1814-3520-2019-4-743-750
Minibaev, M.I., Raskutin, A.E., and Goncharov, V.A., Peculiarities of technology production specimens of PCM on CNC machines (review), Tr. VIAM, 2019, no. 1 (73), pp. 105–114. https://doi.org/10.18577/2307-6046-2019-0-1-105-114
Nasuha, N., Azmi, A.I., and Tan, C.L., A review on mode-I interlaminar fracture toughness of fibre reinforced composites, J. Phys.: Conf. Ser., 2017, vol. 908, no. 1, p. 012024.
Azmi, A.I., Lin, R.J.T., and Bhattacharyya, D., Machinability study of glass fibre-reinforced polymer composites during end milling, Int. J. Adv. Manuf. Technol., 2013, vol. 64, no. 1, pp. 247–261.
Davim, J.P., Machining: Fundamentals and Recent Advances, London: Springer-Verlag, 2008.
Henerichs, M., Machining of carbon fiber reinforced plastics: Influence of tool geometry and fiber orientation on the machining forces, CIRP J. Manuf. Sci. Technol., 2015, vol. 9, pp. 136–145.
Markov, A.M., Nekrasov, V.N., Su, J., Salman, A.M., Gayst, S.V., and Andreev, M.V., Technological assurance of fi berglass composites surface layer quality during end milling, Obrab. Met. (Tekhnol., Oborud., Instrum.), 2020, vol. 22, no. 4, pp. 31–40. https://doi.org/10.17212/1994-6309-2020-22.4-31-40
Patraev, E.V., Vakulin, M.S., Gordeev, Yu.I., and Yasinskii, V.B., High-speed micromilling of composite and aluminum alloy parts, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 2021, no. 12 (741), pp. 62–72.
Gao, C., Xiao, J., Xu, J, and Ke, Y., Factor analysis of machining parameters of fiber-reinforced polymer composites based on finite element simulation with experimental investigation, Int. J. Adv. Manuf. Technol., 2016, vol. 83, nos. 5–8, pp. 1113–1125. https://www.scopus.com. Accessed October 19, 2018.https://doi.org/10.1007/s00170-015-7592-2.
Vakulin, M.S., Gordeev, Y.I., and Yasinsky, V.B., Design of tools with the cutting part of the original profile for high-speed milling, IOP Conf. Ser.: Mater. Sci. Eng., 2020, vol. 754, no. 1, p. 012008.
Shchurov, I.A., Nikonov, A.V., and Boldyrev, I.S., SPH-simulation of the fiber-reinforced composite workpiece cutting for the surface quality improvement, Procedia Eng., 2016, vol. 150, pp. 860–865.
Funding
The work was supported by the Russian President grant no. MK-5531.2021.4.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Gordeev, Y.I., Binchurov, A.S., Yasinskii, V.B. et al. Influence of Cutting Conditions and End Mill Geometry on the Surface Quality in High-Speed Machining of Carbon Composites. Russ. Engin. Res. 43, 592–597 (2023). https://doi.org/10.3103/S1068798X23050313
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23050313