Abstract
The behavior of a spindle assembly with different roller bearing configurations and different bearing spacings is considered. The aim is to find the dependence of the bearing spacing on the flexure of the spindle tip. Empirical formulas are derived for the flexure of the spindle tip with different roller bearing configurations. The empirical formulas may be used in calculations of spindle assemblies, with great time savings.
REFERENCES
Kirilin, Yu.V. and Shesterninov, A.V., Raschet i proektirovanie shpindel’nykh uzlov metallorezhushchikh stankov s oporami kacheniya: Uchebnoe posobie (Calculation and Design of Spindle Assemblies of Metal Cutting Machines with Roller Bearings: Manual), Ul’yanovsk: Ulyanovsk State Tech. Univ., 1998. ISBN 5-89146-000-0.
Kalinkin, V.I., Maskaikina, S.E., and Polueshina, N.I., Proektirovanie i raschet shpindel’nykh uzlov metallorezhushchikh stankov: Uchebnoe posobie (Design and Calculation of Spindle Assemblies of Metal Cutting Machines: Manual), Saransk: Mordovia State Univ., 1998.
Mitin, E.V., Sul’din, S.P., Glebko, V.A., and Mitina, A.E., Analysis of the dynamic characteristics of the torsion system of a lathe, Stanki Instrum., 2019, no. 1, pp. 21–24.
Mitin, E.V., Sul’din, S.P., and Mitina, A.E., Analysis and selection of the optimal method of spindle assembly of a lathe spindle unit, Stanki Instrum., 2019, no. 10, pp. 16–18.
Mitin, E.V., Sul’din, S.P., Glebko, V.A., and Mitina, A.E., Dynamic characteristics of a lathe’s torsional system, Russ. Eng. Res., 2019, vol. 39, no. 6, pp. 516–519. https://doi.org/10.3103/S1068798X19060133
Mitin, E.V., Sul’din, S.P., and Mitina, A.E., Influence of the configuration on the gearbox characteristics in metal-cutting machines, Russ. Eng. Res., 2020, vol. 40, no. 6, pp.491–494. https://doi.org/10.3103/S1068798X20060192
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Mitin, E.V., Sul’din, S.P. Static and Dynamic Spindle Characteristics in Lathes with Different Roller Bearing Configurations. Russ. Engin. Res. 43, 577–580 (2023). https://doi.org/10.3103/S1068798X23050271
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23050271