Abstract
Aspects of the dimensional structure and machining precision are considered. The method employed is analysis of the design, technological, and monitoring dimensions. The machining of components is considered on the basis of dimensional analysis. As an example, a gearbox housing is chosen; its machining by the simple operation categorized as 005 Vertical Milling is discussed.
REFERENCES
Mitin, E.V., Automating the selection of technological bases of hull parts on the basis of three-dimensional models, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Moscow: Mosk. Gos. Tekhnol. Univ. “Stankin”, 2005.
Mitin, E.V., Automating the selection of technological bases of hull parts on the basis of three-dimensional models, Cand. Sci. (Eng.) Dissertation, Moscow, 2005.
Mitin, E.V., Sul’din, S.P., Ovchinnikov, A.Yu., et al., Determination of the accuracy parameters of machining of a part by the graph method based on dimensional relations, Vestn. Mashinostr., 2022, no. 6, pp. 65–71.
Mitin, E.V., Suldin, S.P., Ovchinnikov, A.Yu., et al., Determining the machining precision by a graphical method based on dimensional relations, Russ. Eng. Res., 2022, vol. 42, no. 9, pp. 907–912. https://doi.org/10.3103/S1068798X22090179
Mitin, E.V., Sul’din, S.P., and Mitin, A.E., Formalization of the process of selecting technological bases based on the limitation on the surface extent of a prismatic-shaped part using the geometric information of the intermediate format IGS, Stanki Instrum., 2021, no. 1, pp. 32–35.
Kalyakulin, S.Yu., Kuz’min, V.V., Kuznetsov, P.M., et al., Mathematical design of industrial processes, Russ. Eng. Res., 2020, vol. 40, pp.1045–1047. https://doi.org/10.3103/S1068798X20120060
Mitin, E.V., Sul’din, S.P., and Okunev, D.V., Methods for formalizing the process of automatic selection of bases in the design of machining processes, Stanki Instrum., 2018, no. 5, pp. 17–20.
Mitin, E.V., Sul’din, S.P., and Okunev, D.V., Formalization of automated base selection in the design of machining processes, Russ. Eng. Res., 2018, vol. 38, no. 11, pp. 886–888.
Mitin, E.V., Sul’din, S.P., and Mitina, A.E., IGS-based selection of technological bases in machining a slotted shaft, Russ. Eng. Res., 2020, vol. 40, no. 8, pp. 700–703.
Kalyakulin, S.Yu., Mitin, E.V., and Sul’din, S.P., Models of manufacturing processes based on set theory, Russ. Eng. Res., 2021, vol. 41, no. 4, pp. 312–314.
Kalyakulin, S.Yu., Kuz’min, V.V., Mitin, E.V., and Sul’din, S.P., Automated design of information processing in preproduction, Russ. Eng. Res., 2020, vol. 40, no. 5, pp. 413–415.
Mitin, E.V., Sul’din, S.P., and Mitina, A.E., Using IGS files in formalized selection of technological bases for prismatic components with surface constraints, Russ. Eng. Res., 2021, vol. 41, no. 4, pp. 374–377.
Khoroshko, L.L. and Kuznetsov, P.M., Information environment for the design of industrial processes, Stanki Instrum., 2020, no. 12, pp. 36–41.
Khoroshko, L.L. and Kuznetsov, P.M., Management of short-run production, Russ. Eng. Res., 2020, vol. 40, pp. 1107–1108. https://doi.org/10.3103/S1068798X20120333
Khoroshko L.L., Kuznetsov P.M. Information environment for the design of industrial processes, Russ. Eng. Res., 2021, vol. 41, no. 3, pp. 277–280.
Kuznetsov, P.M. and Yagopol’skii, A.G., Optimizing the idling path of large metal-cutting machines, Russ. Eng. Res., 2020, vol. 40, no. 12, pp. 1081–1083.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Mitin, E.V., Sul’din, S.P. Dimensional Structure and Precision in the Machining of Housing Components. Russ. Engin. Res. 43, 457–460 (2023). https://doi.org/10.3103/S1068798X23050155
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23050155