Abstract
The influence of 10-h annealing at 850°C on the microhardness and structure of a laminar composite consisting of alternating layers of high-nitrogen 08Х17Тstainless steel and Fe–20Cr–5V alloy is studied. Vanadium nitrides are deposited, primarily in oval form, as established by scanning electron microscopy and X-ray microspectral analysis. That increases the microhardness of the vanadium-bearing alloy.
REFERENCES
Tokmakova, T.V., Vysotskaya, V.I., Tokmakova, E.N., and Malikov, S.B., Improving product quality by APQP and PPAP, Stanki Instrum., 2022, no. 1, pp. 33–35.
Tokmakova, T.V., Vysotskaya, V.I., Tokmakova, E.N., and Malikov, S.B., Improving product quality by APQP and PPAP, Russ. Eng. Res., 2022, vol. 42, pp. 286–287.
Llanos, L., Pereda, B., Lopez, B., and Rodriguez-Ibabe, J.M., Hot deformation and static softening behavior of vanadium microalloyed high manganese austenitic steels, Mater. Sci. Eng., A, 2016, vol. 651, pp. 358–369.
Zhang, Z.H., Liu, Y., Zhou, Y.N., et al., Effect of precipitation of (Ti,V)N and V(C,N) secondary phases on mechanical properties of V and N microalloyed 1Cr steels, Mater. Sci. Eng., A, 2018, vol. 738, pp. 203–212.
Sababi, M., Ejnermark, S., Andersson, J., et al., Microstructure influence on corrosion behavior of a Fe–Cr–V–N tool alloy studied by SEM/EDS, scanning Kelvin force microscopy and electrochemical measurement, Corros. Sci., 2013, vol. 66, pp. 153–159.
Tokmakova, E.N., Study of fracture character of layer composite made of nitrogen-containing steel 08X17T and alloy Fe-20Cr-5V after annealing, Sbornik nauchnykh statei 10-i mezhdunarodnoi nauchno-prakticheskoi konferentsii “Perspektivnoe razvitie nauki, tekhniki i tekhnologii” (Coll. Sci. Works 10th Int. Sci.-Pract. Conf. “Perspective Development of Science, Engineering and Technology”), Kursk: Yugo-Zapad. Univ., 2020, pp. 244–246.
Khatkevich, V.M., Nikulin, S.A., Rogachev, S.O., and Tokmakova, E.N., Effect of solid phase nitriding on structure formation and hardening of Fe–Cr–V system alloy, Deform. Razrush. Mater., 2019, no. 6, pp. 17–21.
Khatkevich, V., Nikulin, S., Rogachev, S., and Sergeychev, A., High-temperature internal nitriding of heavy-section steel products, J. Phys.: Conf. Ser., 2017, vol. 879, p. 012008.
Tokmakova, T., Boytsov, A., and Tokmakova, E., Technological capabilities of electric discharge cutting by the end of a rotating non-profiled electrode-tool, Int. J. Mod. Manuf. Technol., 2021, vol. 13, no. 1, pp. 200–205.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Tokmakova, T.V., Tokmakova, E.N. Influence of High-Temperature Annealing on the Structure and Microhardness of a Multilayer Composite Based on Nitrided Steel and Fe–Cr–V Alloy. Russ. Engin. Res. 43, 322–324 (2023). https://doi.org/10.3103/S1068798X23040330
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040330