Abstract
The strength of frames used to lift fire hoses in a tower dryer is investigated by computer modeling.
REFERENCES
Puchkov, P.V. and Nesterov, D.A., Development of a device design for lifting fire hoses into a tower dryer, Sbornik materialov XI Vserossiiskoi nauchno-prakticheskoi konferentsii “Nadezhnost’ i dolgovechnost’ mashin i mekhanizmov” (Proc. XI All-Russia Sci.-Pract. Conf. “Machines and Mechanisms Reliability and Durability”), Ivanovo: Ivanovo Fire Rescue Acad. State Fire Serv. Minist. Emerg. Situat. Russia, 2020, p. 254–258.
Puchkov, P.V., Design concept for lifting devices for drying fire hoses in tower dryers, Sbornik materialov XV mezhdunarodnoi nauchno-prakticheskoi konferentsii “Pozharnaya i avariinaya bezopasnost’”, posvyashchennoi 30-i godovshchine MChS Rossii (Proc. XV Int. Sci.-Pract. Conf. “Fire and Emergency Safety” Dedicated to the 30th Anniversary of Ministry of Emergency Situations of Russia), Ivanovo: Ivanovo Fire Rescue Acad. State Fire Serv. Minist. Emerg. Situat. Russia, 2020, pp. 274–277.
Ivanov, V.E. and Golovatenko, A.Yu., Modern software for conducting strength studies of the developed structures, Sbornik materialov XII Vserossiiskoi nauchno-prakticheskoi konferentsii “Nadezhnost’ i dolgovechnost’ mashin i mekhanizmov” (Proc. XII All-Russia Sci.-Pract. Conf. “Machines and Mechanisms Reliability and Durability”), Ivanovo: Ivanovo Fire Rescue Acad. State Fire Serv. Minist. Emerg. Situat. Russia, 2021, pp. 224–227.
Kiselev, V.V. and Ivanov, V.E., Improving the reliability and durability of the gear wheels of the main transmission of fire trucks by improving the tribotechnical characteristics of transmission oils, Sborka Mashinostr., Priborostr., 2021, no. 10, pp. 475–478.
Ivanov, V.E. and Puchkov, P.V., Investigation of the technical condition of mechanical engineering objects based on computer modeling on the example of the development of clamps for troubleshooting fire hoses, Sborka Mashinostr., Priborostr., 2021, no. 12, pp. 543–546.
Ivanov, V.E. and Puchkov, P.V., Use of modern research methods in the development of new clamp designs for restoring the operability of pressure fire hoses and assessment of their technical condition based on computer modeling, Sborka Mashinostr., Priborostr., 2021, no. 12, pp. 114–118.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Puchkov, P.V., Ivanov, V.E. Strength of Lifting Devices in a Tower Dryer for Fire Hoses. Russ. Engin. Res. 43, 297–298 (2023). https://doi.org/10.3103/S1068798X23040275
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040275