Abstract
A new system for drill machining, design, and improvement is proposed. The system provides maximum detail for preproduction and ensures feedback between different stages of production. That minimizes the time required to introduce new cutting-tool designs in real economy.
This is a preview of subscription content, log in via an institution to check access.
REFERENCES
Kirsanov, S.V., Grechishnikov, V.A., Grigor’ev, S.N., and Skhirtladze, A.G., Obrabotka glubokikh otverstii v mashinostroenii: Spravochnik (Machining of Deep Holes in Mechanical Engineering: Handbook), Moscow: Mashinostroenie, 2010.
Grigor’ev, S.N. and Volosova, M.A., Complex surface hardening of oxide-carbide ceramic cutting tools, Russ. Eng. Res., 2005, vol. 25, no. 9, pp. 7–12.
Grigoriev, S.N., Volosova, M.A., Zelensky, A.A., et al., WEDM as a replacement for grinding in machining ceramic Al2O3-TiC cutting inserts, Metals, 2021, vol. 11, no. 6, p. 882.
Grigor’ev, S.N., Smolentsev, E.V., and Volosova, M.A., Tekhnologiya obrabotki kontsentrirovannymi potokami energii: Uchebnoe posobie (Concentrated Energy Flow Processing Technology: Manual), Staryi Oskol: TNT, 2009.
Groover, M.P., Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, Hoboken, NJ: Wiley, 2016, 6th ed.
Pivkin, P.M., Ershov, A.A., Grechishnikov, V.A., and Nadykto, A.B., A new method for the precise determination of rational geometric parameters of the helical groove and cutting part of high-performance tri-flute, Proc. SPIE, 2020, vol. 11540, p. 1154014. https://doi.org/10.1117/12.2574392
Baroiu, N. and Birsan, D., Stress and deformation states for straight edge and curved edge helical drills, TEHNOMUS, 2015, vol. 22, pp. 94–100.
Pivkin, P.M., Ershov, A.A., Volosova, M.A., et al., Reverse engineering of geometric models of advanced curved edge drills using optical measuring systems, Proc. SPIE, 2021, vol. 11867, p. 118670S. https://doi.org/10.1117/12.2602170
Meng, Q., Zhang, K., Cheng, H., et al., An analytical method for predicting the fluctuation of thrust force during drilling of unidirectional carbon fiber reinforced plastics, J. Compos. Mater., 2015, vol. 49, no. 6, pp. 699–711. https://doi.org/10.1177/0021998314525483
Xiong, L., Shi, H., and Chen, Y., Regrinding the cylindrical flank of curved edge drills, Chin. Mech. Eng., 2007, vol. 18, pp. 1165–1167.
Hsieh, J.-F. and Lin, P.D., Mathematical model of multiflute drill point, Int. J. Mach. Tools Manuf., 2002, vol. 42, no. 10, pp. 1181–1193.
Shi, H.-M., Zhang, H.-S., and Xiong, L.-S., A study on curved edge drills, J. Eng. Ind., 1994, vol. 116, no. 2, pp. 267–273.
Petukhov, Yu.E. and Vodovozov, A.A., Sharpening helical bits with curvilinear cutting edges at the rear surface, Russ. Eng. Res., 2015, vol. 35, no. 9, pp. 670–673.
Granovskii, G.I. and Granovskii, V.G., Rezanie metallov (Metal Cutting), Moscow: Vysshaya Shkola, 1985.
GOST (State Standard) 17274-71: Solid Carbide Twist Drills. Short Series. Design and Dimensions, 1973.
ACKNOWLEDGMENTS
This research was conducted on equipment at the State Engineering Center, STANKIN Moscow State Technical University.
Funding
Financial support was provided by the Russian President as part of the program for young Russian scientists and the MK-2021 competition (grant MK-5557.2021.4).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Pivkin, P.M., Ershov, A.A. Advanced Design and Machining of Three-flute Drills by Multi-axis Grinding, Laser Ablation and Electroerosion. Russ. Engin. Res. 43, 350–354 (2023). https://doi.org/10.3103/S1068798X23040238
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040238