Abstract
The application of corrugation to the internal surface of a cylindrical shell with different notch depth is simulated, for tools with different working profiles. The stress–strain state and damage in the shell on corrugation by different tools are investigated.
REFERENCES
Tregubov, V.I. and Ivanov, Yu.A., Experimental working off of reduction of procurements by the corrugated punch in the conic matrix, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2017, no. 1, pp. 178–182.
RF Patent 2654410.
Pasynkov, A.A., Yakovlev, B.S., and Tregubov, V.I., Analysis of the influence of the taper angle on isothermal crimping of pipe billets, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2021, no. 10, pp. 436–440. https://doi.org/10.24412/2071-6168-2021-10-436-440
Samsonov, N.A. and Larin, S.N., Analysis of strain states of square billets with extended corner elements, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2021, no. 5, pp. 110–113. https://doi.org/10.24412/2071-6168-2021-5-110-113
Pasynkov, A.A., Tregubov, V.I., and Khrychev, I.S., Direct extrusion of a titanium pipe into a die with conical working profile, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2022, no. 2, pp. 34–37. https://doi.org/10.24412/2071-6168-2022-2-34-38
Yakovlev, S.S., Pasynkov, A.A., Bessmertnaya, Yu.V., and Bulychev, V.A., Limiting degree of deformation on the subsequent operations dome rotationally symmetric parts of anisotropic materials under creep, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2015, no. 3, pp. 12–17.
RF Patent 2755137.
Yakovlev, S.S., Analysis of stress intensity and deformation during rifling of the inner surface, Izv. Tul’sk. Gos. Univ. Tekh. Nauki, 2021, no. 5, pp. 88–93.
Gryazev, M.V., Pasynkov, A.A., and Larin, S.N., Effect of initial mechanical anisotropy of the pipe blank in expansion by a conical punch, Russ. Eng. Res., 2018, vol. 38, pp. 371–375. https://doi.org/10.3103/S1068798X1805009X
Pavlov, D.A., Erpalov, M.V., Shimov, G.V., and Pavlova, E.A., Investigation of the influence of material properties on the inhomogeneity of deformation during lengthwise rolling of tubes on a stub mandrel, Chern. Met., 2018, no. 10, pp. 17–21.
Pisarenko, G.S. and Mozharovskii, N.S., Uravneniya i kraevye zadachi teorii plastichnosti i polzuchesti (Equations and Edge Problems of the Theory of Plasticity and Creep), Kiev: Naukova Dumka, 1981.
Golenkov, V.A., Yakovlev, S.P., Golovin, S.A., et al., Teoriya obrabotki metallov davleniem (Theory of Metal Processing by Pressure), Golenkov, V.A. and Yakovlev, S.P., Eds., Moscow: Mashinostroenie, 2009.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem (Mechanics of Metal Processing by Pressure), Moscow: Metallurgiya, 1986.
Funding
Financial support was provided by the Russian Science Fund (grant 22-29-20212; https://rscf.ru/project/22-29-20212/) and the government of the Tula oblast.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kukhar’, V.D., Korotkov, V.A., Yakovlev, S.S. et al. Corrugation of the Inner Surface of a Cylindrical Shell by Local Plastic Deformation. Russ. Engin. Res. 43, 278–280 (2023). https://doi.org/10.3103/S1068798X23040172
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040172