Abstract
An informational model is developed for a grinding wheel whith indexable segments with radially mobile segments, which may be used to grind hollow components with an internal helical (screw) surface.
REFERENCES
Blurtsyan, B.I., RF Patent 2182531, 2000.
Grechishnikov, V.A., Korotkov, I.A., Skhirtladze, A.G., and Gorokhov, V.A., Proektirovanie rezhushchego instrumenta: Uchebnoe posobie (Design of Cutting Tools: Manual), Moscow: Saturn-S, 2003.
Yashkov, V.A., Grechishnikov, V.A., Albagachiev, A.Yu., et al., Modernization of precast abrasive wheel with radially movable segments for internal grinding of hollow parts of robots, Vestn. Mosk. Gos. Tekhnol. Univ. “Stankin”, 2015, no. 4 (35), pp. 8–14.
Lashnev, S.I. and Yulikov, M.I., Raschet i konstruirovanie metallorezhushchikh instrumentov s primeneniem EVM (Automated Calculations and Engineering of Metal Cutting Tools), Moscow: Mashinostroenie, 1975.
Grechishnikov, V.A., Yashkov, V.A., Pivkin, P.A., et al., Abrasive tools for hole machining in robotic systems, Russ. Eng. Res., 2017, vol. 37, pp. 244–247. https://doi.org/10.3103/S1068798X17030078
Grechishnikov, V.A., Yashkov, V.A., Pivkin, P.A., et al., Abrasive tools for hole machining in robotic systems, Russ. Eng. Res., 2017, vol. 37, pp. 244–247. https://elibrary.ru/item.asp?id=29499428
Grigoriev, S.N., Grechishnikov, V.A., Volosova, M.A., et al., Investigation of technological parameters for machining toroidal section of solid ceramic end mills, IOP Conf. Ser.: Mater. Sci. Eng., 2020, vol. 971, no. 2, p. 022065. https://doi.org/10.1088/1757-899X/971/2/022065
Feng, C., Chen, X., Zhang, J., et al., Minimizing the energy consumption of hole machining integrating the optimization of tool path and cutting parameters on CNC machines, Int. J. Adv. Manuf. Technol., 2022, vol. 121, pp. 215–228. https://doi.org/10.1007/s00170-022-09343-5
Yashkov, V.A. and Silin, L.V., Internal grinding without thermal effects, Russ. Eng. Res., 2012, vol. 32, pp. 601–603. https://doi.org/10.3103/S1068798X12060299
ACKNOWLEDGMENTS
This research was conducted on equipment at the State Engineering Center of STANKIN Moscow Technological University.
Funding
Financial support was provided by the Russian Science Fund (project 22-19-00794).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Grechishnikov, V.A., Yashkov, V.A., Pivkin, P.M. et al. Informational Model of Grinding Wheels with Indexable Segments Used for Machining Round Holes with Internal Helical Surfaces. Russ. Engin. Res. 43, 346–349 (2023). https://doi.org/10.3103/S1068798X23040135
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040135