Abstract
The basic capabilities of traditional computer-aided design software and applied programming systems are considered in the context of adapting the information environment for design and technological support of specialized engineering and educational tasks of cutting tools manufacturing using CNC tool and cutter grinding machines.
REFERENCES
Grechishnikov, V.A., Petukhov, Yu.E., Pivkin, P.M., et al., Instrumental’nye sistemy integrirovannykh mashinostroitel’nykh proizvodstv: Uchebnoe posobie (Tooling Systems for Integrated Machine Building Industries: Manual), Moscow: Mosk. Gos. Tekh. Univ. “Stankin”, 2016.
Semenchenko, I.I., Matyushin, V.M., and Sakharov, G.N., Proektirovanie metallorezhushchikh instrumentov (Design of Metal Cutting Tools), Moscow: Mashgiz, 1963.
Lashnev, S.I. and Yulikov, M.I., Raschet i konstruirovanie metallorezhushchikh instrumentov s primeneniem EVM (Automated Calculations and Engineering of Metal Cutting Tools), Moscow: Mashinostroenie, 1975.
Grechishnikov, V.A., Nauka i iskusstvo sistemnogo modelirovaniya instrumental’nogo obespecheniya mashinostroitel’nykh proizvodstv: Monografiya (Science and Art of System Modeling of Tool Support of Machine Engineering Industry: Monograph), Moscow: Kurs, 2016.
Petukhov, Yu.E., Formoobrazovanie chislennymi metodami (Shaping by Numerical Methods), Moscow: Yanus-K, 2004.
Isaev, A.V., Designing prefabricated shaper cutters with circular, interchangeable, multi-faceted inserts on a helical surface, Vestn. Mosk. Gos. Tekhnol. Univ. “Stankin”, 2011, no. 1 (13), pp. 61–66.
Nekrasov, A.Ya., Sobolev, A.N., and Arbuzov, M.O., An innovate interactive software product as a means of the advancement of the efficiency of engineering devices design, Innovatsii, 2016, no. 8 (214), pp. 104–107.
Protas’ev, V.B. and Istotskii, V.V., Proektirovanie fasonnykh instrumentov, izgotavlivaemykh s ispol’zovaniem shlifoval’no-zatochnykh stankov s ChPU (Designing Shaped Tools Made with CNC Grinding and Sharpening Machines), Moscow: Infra-M, 2011.
Pivkin, P.M., Manufacturing process solid cuter for face groove with curve surface, Vestn. Mosk. Gos. Tekhnol. Univ. “Stankin”, 2016, no. 4 (39), pp. 40–46.
Denkena, B., Bergmann, B., Theuer, M., et al., Geometrical process design during continuous generating grinding of cutting tools, Int. J. Adv. Manuf. Technol., 2022, vol. 121, pp. 3871–3882. https://doi.org/10.1007/s00170-022-09573-7
Grigoriev, S.N., Grechishnikov, V.A., Volosova, M.A., et al., Investigation of technological parameters for machining toroidal section of solid ceramic end mills, IOP Conf. Ser.: Mater. Sci. Eng., 2020, vol. 971, no. 2, p. 022065. https://doi.org/10.1088/1757-899X/971/2/022065
Khusainov, R.M., Yurasov, S.Y., Ziyatdinov, R.R., et al., Precision of surfaces machined on a lathe with geometric errors, Russ. Eng. Res., 2017, vol. 37, pp. 266–269. https://doi.org/10.3103/S1068798X17030121
Grigoriev, S.N., Pivkin, P.M., Grechishnikov, V.A., et al., High-precision method for determining the optimal trajectory of movement of a conical grinding wheel relative to the helical groove of solid ceramic mills, Proc. SPIE, 2020, vol. 11540, p. 115401E. https://doi.org/10.1117/12.2574389
Tilove, R.B. and Requicha, A.A.G., Closure of Boolean operations on geometric entities, Comput.-Aided Des., 1980, vol. 12, no. 5, pp. 219–220.
Funding
This work was funded by the Russian Science Foundation under grant no.: 22-19-00794 and was carried out using equipment provided by the Center of Collective Use of MSUT STANKIN.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
About this article
Cite this article
Grechishnikov, V.A., Pivkin, P.M., Isaev, A.V. et al. Expanding the Capabilities of CNC Tool and Cutter Grinding Machines in the Manufacture and Resharpening of Cutting Tools by using CAD API. Russ. Engin. Res. 43, 342–345 (2023). https://doi.org/10.3103/S1068798X23040123
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040123