Abstract
A method is developed for estimating the life of industrial machines. Approaches are proposed for modernization of the machines by replacing their imported components so as to extend the working life.
REFERENCES
Faskhiev, Kh.A., Ensuring the competitiveness of engineering products at the early stages of development, Vestn. Mashinostr., 2022, no. 1, pp. 38–45. https://doi.org/10.36652/0042-4633-2022-1-38-45
Kalmykov, Yu.P., Abdikeev, N.M., Bogachev, Yu.S., and Trifonov, P.V., Directions of improving industrial policy in Russia, Vestn. Mashinostr., 2021, no. 9, pp. 82–88. https://doi.org/10.36652/0042-4633-2021-9-82-88
GOST (Stat Standard) 27434-87: Industrial Tractors. General Specifications, 1989.
GOST (Stat Standard) R 27.403-2009: Dependability in Technics. Compliance Test Plans for Reliability, 2010.
Rukovodyashchii dokument po standartzatsii (Standardization Guide) RD 50-690-89: Methodological Instructions. Reliability in Technique. Methods for Assessing Reliability Indicators from Experimental Data, Moscow: Izd. Standartov, 1990.
Gol’tyapin, V.Ya., Mishurov, N.P., Buklagin, D.S., and Apatenko, A.S., Tendentsii intellektualizatsii traktorov i mashinno-traktornykh agregatov: Analiticheskii obzor (Trends in the Intelligentization of Tractors and Machine-Tractor Units: Analytical Review), Moscow: Rosinformagrotekh, 2021. ISBN 978-5-7367-1648-7.
Akhmetov, A.A., Karimov, A.K., Kambarova, D.U., and Sultanov, Zh.A., Dynamic analysis of the performance of the mechanism for changing the base of a four-wheel tractor, Vestn. Mashinostr., 2022, no. 5, pp. 43–46. https://doi.org/10.36652/0042-4633-2022-5-43-46
Pamfilov, E.A., Kapustin, V.V., Sheveleva, E.V., and Pilyushina, G.A., Increase of wear resistance of technological machines sliding units, Vestn. Mashinostr., 2022, no. 4, pp. 38–42. https://doi.org/10.36652/0042-4633-4-38-42
Leonov, O.A., Temasova, G.N., Shkaruba, N.Z., et al., Method for calculating savings from using a more accurate measuring instruments, J. Phys.: Conf. Ser., 2020, vol. 1515, no. 3, p. 032022. https://doi.org/10.1088/1742-6596/1515/3/032022
Leonov, O.A. and Temasova, G.N., Quality cost estimation methodology for enterprises, Vestn. Mosk. Gos. Agroinzh. Univ. im. V.P. Goryachkina, 2007, no. 5 (25), pp. 23–27.
Bondareva, G.I., Temasova, G.N., Leonov, O.A., et al., Assessing external defects at manufacturing enterprises, Russ. Eng. Res., 2022, vol. 42, no 2, pp. 151–154. https://doi.org/10.3103/S1068798X22020046
GOST (Stat Standard) 27.003-90: Industrial Product Dependability. Dependability Requirements: Contents and General Rules for Specifying, 1992.
Erokhin, M.N., Leonov, O.A., Shkaruba, N.Z., et al., Interest interchangeability of planting with an interference fit, Vestn. Mashinostr., 2020, no. 3, pp. 41–44. https://doi.org/10.36652/0042-4633-2020-3-41-44
Sevryugina, N.S. and Prokhorova, E.V., Assessment of compatibility parameters of unified elements of road machines, Sbornik dokladov (XIX nauchnye chteniya) “Nauchnye issledovaniya, nanosistemy i resursosberegayushchie tekhnologii v promyshlennosti stroitel’nykh materialov” (Coll. Rep. (XIX Sci. Readings) “Scientific Research, Nanosystems and Resource-Saving Technologies in the Building Materials Industry”), Belgorod: Belgorod State Technol. Univ. named after V.G. Shukhov, 2010, pp. 201–208.
Leonov, O.A. and Shkaruba, N.Zh., Development of the management system for metrological assurance of measurements, J. Phys.: Conf. Ser., 2020, vol. 1515, p. 032010. https://doi.org/10.1088/1742-6596/1515/3/032010
Shkaruba, N.Zh., Leonov, O.A., and Bogolubova, D.A., Quality indicators influencing the choice of potato harvester, IOP Conf. Ser.: Earth Environ. Sci., 2022, vol. 981, p. 042040. https://doi.org/10.1088/1755-1315/981/4/042040
Sevryugina, N. and Kapyrin, P., Technological machines, construction resources, efficiency and safety, MATEC Web Conf., 2018, vol. 78, p. 06017. https://doi.org/10.1051/matecconf/201817806017
Erokhin, M.N., Leonov, O.A., Shkaruba, N.Z., et al., Assessing the relative interchangeability in joints with preload, Russ. Eng. Res., 2020, vol. 40, no. 6, pp. 469–472. https://doi.org/10.3103/S1068798X2006009X
Shkaruba, N.Z. and Leonov, O.A., Permissible measurement error in monitoring the shape and position of surface, Russ. Eng. Res., 2021, vol. 41, no. 3, pp. 211–214. https://doi.org/10.3103/S1068798X21030175
Funding
Financial support was provided by the Russian Ministry of Science and Higher Education (contract 075-15-2021/1196/1, October 8, 2021), as part of the Priority 2030 program and the development program for Russian State Agrarian Institute–Timiryazev Moscow Agricultural Ac-ademy.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Golubev, I.G., Sevryugina, N.S., Apatenko, A.S. et al. Modernizing Machines to Extend Their Life. Russ. Engin. Res. 43, 258–263 (2023). https://doi.org/10.3103/S1068798X23040111
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23040111