Abstract
The prospects for 3D printing are considered. Specifically, the influence of additives on the final mixture is investigated. Components of the control system are of particular interest. The printing of geometric shapes is possible. A basic system is outlined for additive production of small architectural forms from basalt fiber concrete mixtures by extrusion.
REFERENCES
Udodov, S.A., Belov, F.A., and Zolotukhina, A.E., 3D printing in construction: a new direction in the technology of concrete and dry building mixes, Sbornik statei VI Mezhdunarodnoi nauchno-prakticheskoi konferentsii “MTsNS: “Nauka i prosveshchenie” (Proc. 6th Int. Sci-Pracr. Conf. “ICSC: Science and Education”), Penza, 2017, pp. 58–62.
Wolfs, R. and Salet, T., An optimization strategy for 3D concrete printing, Proc. 22nd EG-ICE Workshop 2015, Eindhoven, The Netherlands, July 13–16, 2015, p. 114260.
Elistratkin, M.Yu., Lesovik, V.S., and Alfimova, N.I., About developing of the building press technologies, Vestn. Belgorod. Gos. Tekhnol. Univ. im. V.G. Shukhova, 2018, no. 5, pp. 11–19.
Wang, Y., Wu, H.C., and Li, V.C., Concrete reinforcement with recycled fibers, J. Mater. Civ. Eng., 2000, vol. 12, no. 4, pp. 314–319.
Klyuev, S.V., Bratanovskiy, S.N., and Trukhanov, S.V., Strengthening of concrete structures with composite based on carbon fiber, J. Comput. Theor. Nanosci., 2019, vol. 16, no. 7, pp. 2810–2814.
Klyuev, S.V., Khezhev, T.A., and Pukharenko, Y.V., Fibers and their properties for concrete reinforcement, Mater. Sci. Forum, 2018, vol. 945, pp. 125–130.
Klyuev, S.V., Khezhev, T.A., and Pukharenko, Y.V., To the question of fiber reinforcement of concrete, Mater. Sci. Forum, 2018, vol. 945, pp. 25–29.
Klyuev, S.V., Khezhev, T.A., and Pukharenko, Y.V., Experimental study of fiber-reinforced concrete structures, Mater. Sci. Forum, 2018, vol. 945, pp. 115–119.
Klyuev, S.V., Khezhev, T.A., and Pukharenko, Y.V., Fiber concrete for industrial and civil construction, Mater. Sci. Forum, 2018, vol. 945, pp. 120–124.
Klyuev, S., Klyuev, A., and Vatin, N., Fine-grained concrete with combined reinforcement by different types of fibers, MATEC Web Conf., 2018, vol. 245, p. 03006.
ACKNOWLEDGMENTS
This research was conducted on equipment at the High-Technology Center of Shukhov Belgorod State Technical University.
Funding
Financial support was provided within the framework of the Priority 2030 program at Shukhov Belgorod State Technical University.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Klyuev, S.V., Antsiferov, S.I., Klyuev, A.V. et al. Extrusion of Mixtures for the Construction Industry by 3D Printing. Russ. Engin. Res. 43, 107–110 (2023). https://doi.org/10.3103/S1068798X23020168
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23020168