Abstract
Drying drums are important for drying and roasting operations in the preparation of construction materials. To increase their efficiency and reduce the energy consumption in heating, their seals may be improved. To that end, the design of various seals is analyzed, highlighting their advantages and disadvantages. A digital twin of the drying drum is used in developing a hybrid seal. The operating principle of the hybrid seal is considered, and the problems that the new design resolves are noted.
REFERENCES
Fedorenko, M.A., Petal sealing device for cement rotary kilns, Vestn. Belgorod. Gos. Tekhnol. Univ. im. V.G. Shukhova, 2007, no. 3, pp. 94–97.
Zhukova, T.A. and Altukhov, A.V., Ways of intensification of drum-type driers, Vestn. Tambov. Gos. Tekh. Univ., 2008, vol. 14, no. 3, pp. 640–644.
Zuev, V.I. and Mikalutskii, A.E., Improvement of lime-burning rotary kilns, Stroit. Mater., 2017, no. 3, pp. 62–68.
Antsiferov, S.I., Karachevtseva, A.V., Pirieva, S.Yu., et al., Design of drying drum for use in processing gypsum-bearing waste, Russ. Eng. Res., 2022, vol. 42, no. 5, pp. 526–529. https://doi.org/10.3103/S1068798X22050045
Golovanchikov, A.B., Prokhorenko, N.A., Sobolevskii, S.O., and Frolov, A.A., Labyrinth seal of the drum dryer, Vestn. Nauchn. Konf., 2018, no. 9-3 (37), pp. 29–30.
Dyashkin, A.V., Fomin, S.D., Kalinichenko, V.V., et al., Improving the system of sealing devices for movable and fixed joints, Izv. Nizhnevolzh. Agrouniv. Kompl.: Nauka Vyssh. Prof. Obraz., 2014, no. 2 (34), pp. 199–203. https://elibrary.ru/item.asp?id=21624498.
Funding
Financial support was provided within the framework of the state project for the creation of new laboratories in 2021, including laboratories directed by promising young scientists, as part of the National Plan for Science and Universities, with the specific goal of developing scientific and technological principles for the processing of gypsum-bearing waste from various industrial enterprises (FZWG-2021-0017). Administrative support was provided by the Research Center on Innovative Solutions in Industrial Agriculture, Belgorod.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Antsiferov, S.I., Nikulin, I.S., Saenko, M.Y. et al. Hybrid Drying-Drum Seals. Russ. Engin. Res. 43, 88–90 (2023). https://doi.org/10.3103/S1068798X23020053
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X23020053