Abstract
The importance of predicting the fibrous structure of extruded parts is established. Some incorrect statements about channel extrusion in the literature are noted. A correct sequence for the analysis of fibrous structure is formulated.
Similar content being viewed by others
REFERENCES
Vorontsov, A.L., Stamping of nonuniform channels. 1. Comparison of methods of channel production, Russ. Eng. Res., 2021, vol. 41, pp. 308–311. https://doi.org/10.3103/S1068798X21040249
Vorontsov, A.L., Stamping of nonuniform channels. 2. Theoretical analyses of nonuniform-channel extrusion: A review, Russ. Eng. Res., 2021, vol. 41, pp. 410–415. https://doi.org/10.3103/S1068798X21050269
Vorontsov, A.L., Stamping of nonuniform channels. 3. Forces and shape changes in channel extrusion. 3.1. Kinematic and stress state of workpiece, Russ. Eng. Res., 2021, vol. 41, pp. 519–524. https://doi.org/10.3103/S1068798X21060253
Vorontsov, A.L., Stamping of nonuniform channels. 3. Forces and shape changes in channel extrusion. 3.2. Determining the extrusion force, maximum wall pressure, and wall height, Russ. Eng. Res., 2021, vol. 41, pp. 621–626. https://doi.org/10.3103/S1068798X21070261
Vorontsov, A.L., Stamping of nonuniform channels. 4. Deformed state of the workpiece on channel extrusion. 4.1. Deformation in the region of wall formation, Russ. Eng. Res., 2021, vol. 41, pp. 714–718. https://doi.org/10.3103/S1068798X21080268
Vorontsov, A.L., Stamping of nonuniform channels. 4. Deformed state of the workpiece on channel extrusion. 4.2. Deformation under the end of the Punch, Russ. Eng. Res., 2021, vol. 41, pp. 820–823. https://doi.org/10.3103/S1068798X21090288
Vorontsov, A.L., Stamping of nonuniform channels. 4. Deformed state of the workpiece on channel extrusion. 4.3. Taking account of hardening, Russ. Eng. Res., 2021, vol. 41, pp. 924–926. https://doi.org/10.3103/S1068798X21100300
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.1. Formulas, Russ. Eng. Res., 2021, vol. 41, pp. 1035–1039. https://doi.org/10.3103/S1068798X21110290
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.2. Extrusion of nonhardening materials, Russ. Eng. Res., 2021, vol. 42, pp. 35–43 (2022). https://doi.org/10.3103/S1068798X22010233
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.3. Extrusion of hardening materials, Russ. Eng. Res., 2021, vol. 42, pp. 132–137. https://doi.org/10.3103/S1068798X22020265
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.4. Methods of controlling the extruded flow, Russ. Eng. Res., 2021, vol. 42, pp. 680–684. https://doi.org/10.3103/S1068798X22070310
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.5. Other methods of controlling the extruded flow, Russ. Eng. Res., 2021, vol. 42, pp. 807–811. https://doi.org/10.3103/S1068798X22080263
Miklyaev, P.G., Neshpor, G.S., and Kudryashov, V.G., Kinetika razrusheniya (Destruction Kinetics), Moscow: Metallurgiya, 1979.
Lakhtin, Yu.M., Metallovedenie i termoobrabotka metallov (Metal Science and Heat Treatment of Metals), Moscow: Metallurgiya, 1977.
Storozhev, M.V. and Popov, E.A., Teoriya obrabotki metallov davleniem (Theory of Metal Forming), Moscow: Mashinostroenie, 1977.
Dal’skii, A.M., Barsukova, T.M., Gavrilyuk, V.S., et al., Tekhnologiya konstruktsionnykh materialov (Technology of Construction Materials), Moscow: Mashinostroenie, 2005.
Evstratov, V.A., Kulikov, I.V., and Ivanov, O.M., Influence of tool misalignment on the character of deformation, power mode, and loads affecting the punch during extrusion, Vestn. Khar’k. Politekh. Inst., 1977, no. 131, pp. 38–44.
Kulikov, I.V., The influence of backpressure on the form change and force mode during flat asymmetric extrusion, Vestn. Khar’k. Politekh. Inst., 1977, no. 131, pp. 45–48.
Evstratov, V.A., Kirillov, G.I., and Chegrinets, O.A., Extrusion of the parts such as glasses in conditions of misalignment of the tool, Vestn. Khar’k. Politekh. Inst., 1985, no. 225, pp. 49–51.
Evstratov, V.A., Analysis of the force mode of extrusion of parts such as glasses in conditions of misaligned arrangement of the tool, Vestn. Khar’k. Politekh. Inst., 1988, no. 261, pp. 53–56.
Semenov, E.I., Closed firmware with different wall thickness of the cup and with different end of the Punch, Sbornik nauchnykh trudov mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Progressivnye tekhnologii i oborudovanie kuznechno-shtampovochnogo proizvodstva” (Proc. Int. Sci. and Tech. Conf. “Advanced Technologies and Equipment for Forging and Stamping Production”), Moscow: Mosk. Avtomekh. Inst., 2003, pp. 41–48.
Vorontsov, A.L., Teoriya shtampovki vydavlivaniem (Theory of Extrusive Stamping), Moscow: Mashinostroenie, 2004.
Vorontsov, A.L., Teoriya i raschety protsessov obrabotki metallov davleniem (Theory and Calculations of Metal Forming by Pressure), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, vol. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
Earlier articles in this series may be found in Russian Engineering Research in issue 11 (2021) and in issues 1, 2, and 6–8 (2022).
About this article
Cite this article
Vorontsov, A.L. Stamping of Nonuniform Channels. 6. Fibrous Structure in Channel Extrusion. 6.1. Basic Principles. Russ. Engin. Res. 42, 1137–1142 (2022). https://doi.org/10.3103/S1068798X22110235
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22110235