Abstract
The formulation of permanent joints is considered. To improve joint creation, resolution of their stress–state into components during the design stage is proposed.
Similar content being viewed by others
REFERENCES
Paton, B.E. and Trufyakov, V.I., On increasing the bearing capacity and durability of welded structures, Avtomat. Svarka, 1982, no. 2, pp. 1–6.
Tsumarev, Yu.A., Methodology for assessing the strength of butt-type soldered joints, Tekhnol. Mashinostr., 2009, no. 3, pp. 23–26.
Tsumarev, Yu.A., Ignatova, E.V., Latypova, E.Yu., and Latun, T.S., Effect of bending on stress concentration in butt-type soldered joints, Svar. Proizvod., 2015, no. 9, pp. 43–45.
Tsumarev, Yu.A., Tsumarev, E.N., Sheleg, V.K., and Latypova, E.Yu., Systematic approach to the technique of creating permanent joints, Tekhnol. Mashinostr., 2015, no. 12, pp. 23–27.
Asnis, A.E. and Ivashchenko, G.A., Povyshenie prochnosti svarnykh konstruktsii (Increasing Strength of Welded Structures), Kiev: Navukova Dumka, 1978.
Latypova, E.Yu. and Tsumarev, Yu.A., Composite structural elements for all-in-one connections, Svar. Proizvod., 2016, no. 3, pp. 33–38.
Feodos’ev, V.I., Soprotivlenie materialov (Strength of Materials), Moscow: Nauka, 1970.
Nikolaev, G.A. and Vinokurov, V.A., Svarnye konstruktsiii. Raschet i proektirovanie (Welded Structures. Calculation and Design), Moscow: Vysshaya Shkola, 1990.
Tsumarev, Yu.A., Evaluation of static strength of soldered combined joints, Svarka Diagnost., 2010, no. 2, pp. 46–49.
Tsumarev, Yu.A. and Tarasenko, I.V., Samples for -determining the cyclic strength of soldered joints by bending with rotation, Svar. Proizvod., 2004, no. 2, pp. 17–18.
Tsumarev, Yu.A., Calculation of the stress-strain state of overlapping joints, Svarka Diagnost., 2011, no. 2, pp. 14–18.
Tsumarev, Yu.A., Contact spot welding with special preparation of the edges to be welded, Avtomat. Svarka, 2010, no. 3, pp. 59–61.
Tsumarev, Yu.A., Effect of off-center stretching on the stress state of the butt weld joint, Svar. Proizvod., 2010, no. 6, pp. 6–10.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Latun, T.S., Tsumarev, Y.A., Sheleg, V.K. et al. Resolution of Stress into Components for Strength Assessments of Permanent Joints. Russ. Engin. Res. 42, 1149–1153 (2022). https://doi.org/10.3103/S1068798X22110168
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22110168