Abstract
The surface quality at the edges of carbon fiber components is analyzed. The edges are machined by means of an abrasive wheel with a diamond coating and the end face of a Р6М5 steel end mill. A mathematical model is proposed for use in selecting the machining technology for polymer composites.
Similar content being viewed by others
REFERENCES
Oreshko, E.I., Erasov, V.S., Lashov, O.A., Podzhivotov, N.Yu., and Kachan, D.V., Calculation of tension in a layered material, Tr. VIAM, 2018, no. 10 (70), pp. 93–106.
Zubarev, M.Yu. and Priemyshev, A.V., Innovation technologies of polymeric composite materials in mechanical engineering, Naukoem. Tekhnol. Mashinostr., 2017, no. 8 (74), pp. 36–42.
Timoshkov, P.N., Khrul’kov, A.V., and Yazvenko, L.N., Composite materials in automotive industry (review), Tr. VIAM, 2017, no. 6 (54), pp. 61–68.
Kablov, E.N., Composites: Today and tomorrow, Met. Evrazii, 2015, no. 1, pp. 36–39.
Zorin, V.A., Baurova, N.I., Balovnev, V.I., Grib, V.V., and Kosenko, E.A., Informational model of state change in a mechanical system, Russ. Eng. Res., 2019, vol. 39, pp. 680–682. https://doi.org/10.3103/S1068798X19080227
Zorin, V.A., Baurova, N.I., Balovnev, V.I., Grib, V.V., and Kosenko, E.A., Assessing the state of mechanical systems of different complexity, Russ. Eng. Res., 2019, vol. 39, pp. 683–685. https://doi.org/10.3103/S1068798X19080239
Geier, N., Davim, J.P., and Szalay, T., Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review, Composites, Part A, 2019, vol. 125, p. 105552.
Raskutin, A.E., Khrul’kov, A.V., and Girsh, R.I., Technological features of composite materials machining in manufacturing details of structures (review), Tr. VIAM, 2016, no. 9 (45), pp. 106–118.
Minibaev, M.I., Usacheva, M.N., Dyshenko, V.S., and Goncharov, V.A., Device and tool for making sample from polymer composite materials on a CNC machine (review), Tr. VIAM, 2021, no. 4 (98), pp. 100–109.
Petrushin, S.I., Danilenko, B.D., and Retyunskii, O.Yu., Optimizatsiya svoistv materiala v kompozitsionnoi rezhushchei chasti lezviinykh instrumentov: Uchebnoe posobie (Optimization of Material Properties in the Composite Cutting Part of Blade Tools: Manual), Tomsk: Tomsk. Politekh. Univ., 1999.
Lobanov, D.V., Development and implementation of technological methods for the creation, manufacture and selection of milling tools for efficient processing of composite non-metallic materials, Doctoral (Eng.) Dissertation, Novosibirsk: Bratsk. Gos. Univ.–Novosibirsk. Gos. Univ., 2013.
Altin Karatas, M. and Gokkaya, H., A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials, Def. Technol., 2018, vol. 14, no. 4, pp. 318–326. https://doi.org/10.1016/j.dt.2018.02.001
Bolotnikov, I.S. and Kosenko, E.A., Methods of mechanical treatment of machine parts made of fibrous polymer composite materials (review), Remont. Vosstanovl. Modern., 2021, no. 6, pp. 35–38.
ACKNOWLEDGMENTS
The experiments were conducted using equipment at the MADI Collective Use Center.
Funding
Financial support was provided as part of project FSFM-2020-0011 (2019-1342).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Bolotnikov, I.S., Kosenko, E.A., Baurova, N.I. et al. Tool Selection in Machining the Edges of Carbon Fiber Parts. Russ. Engin. Res. 42, 1185–1188 (2022). https://doi.org/10.3103/S1068798X22110053
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22110053