Abstract
Division of the gear ratio for a two-stage cylindrical coaxial gearbox between its stages is considered, on the basis of the gearbox’s frontal area and its mass. The results are approximated by power laws.
Similar content being viewed by others
REFERENCES
Ukraine Patent no. 135044, 2006.
Shevchenko, S., Mukhovaty, A., and Krol, O., Modification of two-stage coaxial gearbox, Proc. 6th Int. Conf. on Industrial Engineering (ICIE 2020). Lecture Notes in Mech. Eng., 2021, vol. 1, pp. 28–34.
Shevchenko, S.V., Detali mashin. Raschety, konstruirovanie, zadachi (Machine Parts. Calculations, Design, Tasks), Lugansk: Lugans. Nats. Univ. im. V. Dalya, 2019.
Moiseev, N.N., Metody optimizatsii (Optimization Methods), Moscow: Nauka, 1978.
GOST (State Standard) 20373–94: Reducers and Gear-Motors. Assembly Variations, 1996.
GOST (State Standard) 25301–95: Cylindrical Reducing Gears. Parameters, 2000.
Mashinostroenie: Entsiklopediya. Tom IV-1: Detali mashin. Konstruktsionnaya prochnost’. Trenie, iznos, smazka (Machine Engineering: Encyclopedia, Vol. 4-1: Machine Parts. Construction Strength. Friction, Wear, and Lubrication), Reshetov, D.N., Ed., Moscow: Mashinostroenie, 1995.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Shevchenko, S.V., Mukhovatiy, A.A. & Krol’, O.S. Optimizing a Coaxial Gearbox. Russ. Engin. Res. 42, 794–796 (2022). https://doi.org/10.3103/S1068798X22080226
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22080226