Abstract
A model is proposed for the heat transfer in the steam cleaning of surfaces by means of an abrasive jet, taking account of the design features and the power of the heat flux.
Similar content being viewed by others
REFERENCES
Shakhov, A.M. and Artyukh, N.V., Cutting of joints of cement concrete road coverings with thermo sandblasting tool, in Nauchno-Tekhnicheskii Sbornik (Scientific and Technical Collection), Balashikha: Voenno-Tekh. Univ., 2002, pp. 21–23.
Puzryakov, A.F., Kravchenko, I.N., Sokolov, I.K., et al., Tekhnologii naneseniya zashchitnykh i iznosostoikikh pokrytii povyshennoi prochnosti (Technologies for Applying Protective and Wear-Resistant Coatings of Increased Strength), Moscow: Eko-Press, 2013.
Evseev, D.G., Kul’kov, A.A., and Korytov, A.Yu., Research of process of forming of surface quality when processing cars gas-dynamic method, Metalloobrabotka, 2015, no. 6 (90), pp. 39–41.
Kravchenko, I.N., Kataev, Yu.V., Sirotov, A.V., et al., Preparation of surfaces of parts for applying hardening coatings, Sel’sk. Mekhanizator, 2017, no. 8, pp. 36–38.
Kravchenko, I.N., Slivov, A.F., and Korneev, V.M., Cleaning of surfaces of parts during their restoration, Sel’sk. Mekhanizator, 2019, no. 8, pp. 38–40.
Momber, A., Blast Cleaning Technology, Hamburg: Springer, 2008.
Bochkarev, P.Yu., Zakharov, O.V., and Sklyarov, I.A., Abrasive blasting of the large workpieces, Vestn. Yuzhno-Ural. Gos. Univ. Ser. Mashinostr., 2015, vol. 15, no. 3, pp. 56–62.
Kul’kov, A.A. and Larionov, M.A., Peculiarities of metal surface abrasive jet processing before coloring, Naukoem. Tekhnol. Mashinostr., 2018, no. 12 (90), pp. 15–20.
Kravchenko, I.N., Kuznetsov, Yu.A., Sirotov, A.V., et al., Anticorrosion protection of the heat-exchange equipment of farm processing enterprises with repair and recovery coatings, Vestn. Mosk. Gos. Agrarnoinzh. Univ. im. V.P. Goryachkina, 2019, no. 3 (91), pp. 52–58. https://doi.ogr/10.34677/1728-7936-2019-3-51-58
Kulikov, M.Yu. and Kul’kov, A.A., Technical and economic efficiency assessment of metal elements abrasive-jet processing in railroad car bodies, Vestn. Bryansk. Gos. Tekh. Univ., 2019, no. 6 (79), pp. 65–68.
Kul’kov, A.A., Evseev, D.G., and Korytov, A.Yu., Evaluating the effectiveness of surface treatment process before painting carriages, Metalloobrabotka, 2016, no. 4 (94), pp. 66–67.
Ageev, P.G., Ageev, N.P., Pashchenko, A.F., et al., Experimental study of plasma-impulse impact: intensity of pressure pulsations in the medium processed, J. Mach. Manuf. Reliab., 2019, vol. 48, pp. 184–189. https://doi.org/10.3103/S1052618819020031
Kravchenko, I.N., Korneev, V.M., Slivov, A.F., et al., Thermosteamabrasiveblasting cleaning of dirty surfaces of components, Remont. Vosstan. Moderniz., 2019, no. 5, pp. 20–24. https://doi.org/10.31044/1684-2561-2019-0-5-20-24
Artyukh, N.V. et al., RU Patent 2486046, 2013.
Tsvetkov, F.F. and Grigor’ev, B.A., Teplomassoobmen (Heat and Mass Transfer), Moscow: Izd. Dom MEI, 2011.
Gotovskii, M.A. and Suslov, V.A., Teplomassoobmen v tekhnologicheskikh ustanovkakh (Heat and Mass Transfer in Technological Installations), St. Petersburg: Politekh. Univ., 2017.
Abramovich, G.I., Prikladnaya gazovaya dinamika (Applied Gas Dynamics), Moscow: Nauka, 1991, part 1, 5th ed.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kravchenko, I.N., Amelin, S.S., Kurmenev, D.V. et al. Formation of the Working Flux in an Abrasive Jet for Steam Cleaning. Russ. Engin. Res. 42, 685–688 (2022). https://doi.org/10.3103/S1068798X22070176
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22070176