Abstract
Methods of producing hollow and nonhollow cylindrical billet by shaping heterogeneous and ceramic materials under axial pressure, with and without a mandrel, are considered.
Similar content being viewed by others
REFERENCES
Timoshenko, S.P. and Goodyear, J., Theory of Elasticity, New York: McGraw-Hill, 1970.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem (Mechanics of Metal Processing by Pressure), Moscow: Metallurgiya, 1986.
Druyanov, B.A., Prikladnaya teoriya plastichnosti poristykh tel (Applied Theory of Plasticity of Porous Bodies), Moscow: Mashinostroenie, 1989.
Grigor’ev, A.K. and Rudskoi, A.I., Deformatsiya i uplotnenie poroshkovykh materialov (Deformation and Compaction of Powder Materials), Moscow: Metallurgiya, 1992.
Perel’man, V.E., Teoriya pressovaniya metallicheskikh poroshkov (Theory of Pressing Metal Powders), Moscow: Metallurgiya, 1979.
Funding
The work was supported by the Ministry of Science and Higher Education of Russian Federartion, project no. FENU-2020-0020, 2020071GZ.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they has no conflict of interest.
Additional information
Translated by B. Gilbert
About this article
Cite this article
Osintsev, A.A., Samodurova, M.N. & Barkov, L.A. Axial Compression of Hollow and Nonhollow Cylindrical Billet. Russ. Engin. Res. 42, 458–460 (2022). https://doi.org/10.3103/S1068798X22050227
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22050227