Abstract
The sources of errors in the relative position of the floor of a recess and the base of the part and also in the shape of the floor are investigated. A method is proposed for calculating electrolysis conditions ensuring the specified accuracy and surface roughness.
Similar content being viewed by others
REFERENCES
Benikov, V.S., Dikusar, A.I., and Saushkin, B.P., The analysis of technologies of production of surface underratings of 10–20 μm, Uprochn. Tekhnol. Pokryt., 2008, no. 6, pp. 48–53.
Astakhov, Yu.P., Kochergin, S.A., Mitryushin, E.A., et al., Surface relieves micromachining with application of methods of physicochemical effect on material, Naukoem. Tekhnol. Mashinostr., 2012, no. 7 (13), pp. 33–38.
Kochergin, S.A., Morgunov, Yu.A., and Saushkin, B.P., Surface manufacturing under pulse fiber laser, Procedia CIRP, 2016, vol. 42, pp. 470–474.
Kochergin, S.A., Morgunov, Yu.A., and Saushkin, B.P., Features of a single crater formation under the influence of the impulse of laser radiation on the material, Surf. Eng. Appl. Electrochem., 2017, vol. 53, no. 2, pp. 111–115.
Morgunov, Yu.A., Saushkin, G.B., and Viligdanov, T.V., Electrochemical engraving of aerodynamic understatement in equipment with a flow channel, Metalloobrabotka, 2010, no. 2 (56), pp. 70–74.
Morgunov, Yu.A., Saushkin, B.P., and Saushkin, G.B., Micromachining of titanium-alloy components, Russ. Eng. Res., 2019, vol. 39, no. 2, pp. 125–128.
Wang, Z., Zhu, Y., Fan, Z., and Yun, N., Electrochemical micro machining, Proc. 16th Int. Symp. on Electromachining, 2010, pp. 351–356.
Yang, Y., Natsu, W., and Zhao, W., Fundamental research on electrochemical micro machining by using water as the electrolyte, Proc. 16th Int. Symp. on Electromachining, 2010, pp. 307–312.
Yong, L. and Ruigin, H., Micro electrochemical machining for tapered holes of fuel jet nozzles, Procedia CIRP, 2013, vol. 6, pp. 391–395.
Chen, Ch., Li, J., Zhan, Sh., Yu, Z., and Xu, W., Study of micro groove machining by micro ECM, Procedia CIRP, 2016, vol. 42, pp. 418–422. https://doi.org/10.1016/j.procir.2016.02.224
Guodong, L., Yong, L., Quancun, K., and Hao, T., Selection and Optimization of electrolyte for micro electrochemical machining on stainless steel 304, Procedia CIRP, 2016, vol. 42, pp. 412–417.
Sootnosheniya mezhdu dopuskami razmera, formy, raspolozheniya i sherokhovatosti poverkhnostei B-V-RTM-62-71 (The Relationship between the Tolerances of the Size, Shape, Location and Roughness of Surfaces BV-RTM-62-71), Moscow: NIIMASh, 1973.
GOST (State Standard) 24642-81: Basic Norms of Interchangeability. Tolerances of Form and Position. Basic Terms and Definitions, 2002.
Lomaev, V.I., Morgunov, Yu.A., Saushkin, B.P., and Saushkin, G.B., Elektrokhimicheskaya obrabotka izdelii aviatsionno-kosmicheskoi tekhniki (Electrochemical Treatment of Aerospace Engineering Products), Saushkin, B.P., Ed., Moscow: Forum, 2013.
Dopuski i posadki: Spravochnik, Chast’ 1 (Tolerances and Landings: Handbook), Myagkov, V.D., Ed., L-e-ningrad: Mashinostroenie, 1978, part 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Morgunov, Y.A., Saushkin, B.P. & Khomyakova, N.V. Profile Error and Surface Roughness in Electrochemical Micromachining. Russ. Engin. Res. 42, 232–238 (2022). https://doi.org/10.3103/S1068798X22030169
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22030169