Abstract
A nondestructive method of determining the shear strength is outlined. This method is based on the laws describing elastoplastic indenter introduction. Experiments confirm the practical applicability of the method. It is intended for use with load-limiting safety devices.
Similar content being viewed by others
REFERENCES
Anur’ev, V.I., Spravochnik konstruktora-mashinostroitelya (Handbook of Machine Engineer), Zhestkova, I.N., Ed., Moscow: Mashinostroenie, 2006, 9th ed.
Kaptelin, S.Yu., RF Patent 2658103, 2018.
Kolesnikov, V.M., RF Patent 2411495, 2011.
OST (State Standard) 190148-74: Metals. Testing for Shear, Moscow: Tipogr. MAP, 1975.
GOST (State Standard) 1497–84: Metals. Methods of Tension Test, Moscow: Izd. Standartov, 1985.
RD EO 0027-2005. Instruktsiya po opredeleniyu mekhanicheskikh svoistv metalla oborudovaniya atomnykh stantsii bezobraztsovymi metodami po kharakteristikam tverdosti (RD EO 0027-2005. Instructions for Determination of the Mechanical Properties of Metal Equipment for Nuclear Power Plants by Sampleless Methods Based on Hardness Characteristics), Moscow: Rosenergoatom, 2005.
GOST (State Standard) R 56474–2015: Space Systems. Nondestructive Testing of Physical and Mechanical Properties of Space Technique’s Materials and Coatings by Dynamic Indentation. General Requirements, Moscow: Standartinform, 2016.
Matyunin, V.M., Indentirovanie v diagnostike mekhanicheskikh svoistv materialov (Indentation in the Diagnostics of Mechanical Properties of Materials), Moscow: Mosk. Energ. Inst., 2015.
Matlin, M.M., Mozgunova, A.I., Kazankina, E.N., and Kazankin, V.A., Metody nerazrushayushchego kontrolya prochnostnykh svoistv detalei mahsin (Nondestructive Testing of Strength Properties of Machine Parts), Moscow: Innovatsionnoe Mashinostroenie, 2019.
Matlin, M.M., Kazankin, V.A., and Kazankina, E.N., RF Patent 2740634, 2021.
GOST (State Standard) 18835–73: Metals. Plastic Hardness Measurement, Moscow: Izd. Standartov, 1974.
Gustov, Yu.I., Voronina, I.V., and Allattuf, H.L., Relationship between shear stresses and the fatigue maximum of metallic materials, Vestn. Mosk. Gos. Stroit. Univ., 2013, no. 4, pp. 32–37.
Funding
Financial support was provided by the Russian Foundation for Basic Research (project 19-08-00049); and also by the Russian President within the framework of the МK-2021 competition (grant МK-84.2021.4).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Matlin, M.M., Kazankin, V.A. & Kazankina, E.N. Nondestructive Strength Monitoring of Load-Limiting Safety Components. Russ. Engin. Res. 42, 107–109 (2022). https://doi.org/10.3103/S1068798X22020162
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22020162