Abstract
Recrystallization of 12Х18Н10Т austenitic steel in hot fractional deformation is studied in tests simulating the production of stepped workpieces. The kinetics of recrystallization is determined. Recommendations are made regarding the conditions of hot fractional deformation when forging workpieces.
Similar content being viewed by others
REFERENCES
Gorelik, S.S., Dobatkin, S.V., and Kaputkina, L.M., Rekristallizatsiya metallov i splavov (Recrystallization of Metals and Alloys), Moscow: Mosk. Inst. Stali Splavov, 2005.
Okhrimenko, Ya.M., Tekhnologiya kuznechno-shtampovochnogo proizvodstva (Technology of Forging and Stamping Manufacture), Moscow: Mashinostroenie, 1976.
Tarnovskii, I.Ya., Trubin, V.N., and Zlatkin, M.G., Svobodnaya kovka na pressakh (Provisional Forging on Presses), Moscow: Mashinostroenie, 1967.
Galkin, V.V., Gavrilov, G.N., Derbenev, A.A., and Bratukhin, A.V., Inzhenernye resheniya otsenki mekhanicheskikh svoistv kholodnodeformirovannykh metallicheskikh materialov v usloviyakh mnogoetapnoi obrabotki: monografiya (Engineering Solutions for Evaluation of the Mechanical Properties of Cold-Deformed Metallic Materials during Multistage Processing: Monograph), Nizhny Novgorod: Nizhegorod. Gos. Tekh. Univ., 2019.
Galkin, V.V., Derbenev, A.A., Koshelev, O.S., and Tereshchenko, E.G., Recrystallization of 12Kh18N10T stainless steel in conditions of multi-transient hot plastic processing, Zagotovit. Proizvod. Mashinostr., 2017, no. 4, pp. 6–10.
Mantserov, S.A., Galkin, V.V., Khadeev, R.G., Tere-shchenko, E.G., Derbenev, A.A., and Pachurin, V.G., RF Inventor’s Certificate no. 2014613502, 2015.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Galkin, V.V., Gavrilov, G.N., Ryabtsev, A.D. et al. Recrystallization of Austenitic Steel in Hot Fractional Deformation. Russ. Engin. Res. 42, 138–144 (2022). https://doi.org/10.3103/S1068798X22020083
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22020083