Abstract
Channel extrusion is studied experimentally for nonhardening materials. Comparison of the experimental and theoretical results shows that the formulas are highly accurate.
Similar content being viewed by others
REFERENCES
Vorontsov, A.L., Stamping of nonuniform channels. 5. Calculation methods for channel extrusion. 5.1. Formulas, Russ. Eng. Res., 2021, vol. 41, no. 11, pp. 1035–1039.
Vorontsov, A.L., Stamping of nonuniform channels. 3. Forces and shape changes in channel extrusion. 3.2. Determining the extrusion force, maximum wall pressure, and wall height, Russ. Eng. Res., 2021, vol. 41, no. 7, pp. 621–626.
Vorontsov, A.L., Stamping of nonuniform channels. 2. Theoretical analyses of nonuniform-channel extrusion: a review, Russ. Eng. Res., 2021, vol. 41, no. 7, pp. 410–415.
Evstratov, V.A., Kulikov, I.V., and Ivanov, O.M., Influence of tool misalignment on the deformation, power mode, and loads acting on the punch during extrusion, Vestn. Khar’k. Politekh. Inst., 1977, no. 131, pp. 38–44.
Vorontsov, A.L., Teoriya i raschety protsessov obrabotki metallov davleniem (Theory and Calculations of Metal Forming by Pressure), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, vol. 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Vorontsov, A.L. Stamping of Nonuniform Channels. 5. Calculation Methods for Channel Extrusion. 5.2. Extrusion of Nonhardening Materials. Russ. Engin. Res. 42, 35–43 (2022). https://doi.org/10.3103/S1068798X22010233
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X22010233