Abstract
After noise analysis of chain drives, means of noise reduction are investigated. Often known as silent drives, such transmissions are less noisy than other chain drive. The velocity of chain impact on the sprocket is proposed for use in assessing the noise of a chain drive. The noise benefits of an involute sprocket in involute sprocket are outlined, and the theoretical analysis is compared with experimental data.
Similar content being viewed by others
REFERENCES
Lenard, J., Velicu, R., and Săulescu, R., Geometry of silent chain—involute sprocket, MATEC Web Conf., 2018, vol. 184, art. ID 02003. https://doi.org/10.1051/matecconf/201818402003
Lenard, J., Săulescu, R., and Velicu, R., Sprocket—silent chain force distribution with the influence of friction, Appl. Mech. Mater., 2018, vol. 880, pp. 21–26. https://doi.org/10.4028/www.scientific.net/AMM.880.21
Wang, G., Wang, H., Zhang, X., Li, B., Chen, D., and Li, Y., Center distance change of silent chain drive effect on sprocket tooth profile modification, Key Eng. Mater., 2012, vol. 522, pp. 574–577.
Dong, S., Liu, X.L., Cao, Y., et al., Study on join fastness of silent chain, Appl. Mech. Mater., 2013, vols. 475–476, pp. 1371–1374.
Fot, A.P., Uchaev, P.N., and Yakovlev, B.V., Noise of gears with toothed chains, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1980, vol. 12, pp. 46–48.
Berezhnoi, S.B., Voina, A.A., and Kurapov, G.V., Analysis of the impact resistance of the chain depending on the tooth profile of the sprocket, Nauchn. Zh. Kuban. Agrar. Univ., 2015, no. 3 (107). http://ej.kubagro.ru/2015/03/pdf/98.pdf.
GOST (State Standard) R ISO 3741–2013: Acoustics. Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure. Precision Methods for Reverberation Test Rooms, Moscow: Standartinform, 2014.
GOST (State Standard) 13576–81: Chain Wheels for Driving Tooth Chains. Method of Calculation and Construction of Tooth Form. Tolerances, Moscow: Izd. Standartov, 1982.
GOST (State Standard) 591–69: Sprocket Wheels for Roller and Sleeve-Tepe Chains. Methods of Calculation and Construction of Tooth Profile and Cutting Tool Form. Tolerances, Moscow: Izd. Standartov, 1970.
Berezhnoi, S.B., Puntus, A.V., Mevsha, N.V., Voina, A.A., and Kurapov, G.V., RF Patent 147242, Byull. Izobret., 2014, no. 30.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kurapov, G.V., Berezhnoi, S.B. Noise Characteristics of Chain Drives with Involute Sprockets. Russ. Engin. Res. 41, 1236–1238 (2021). https://doi.org/10.3103/S1068798X21120261
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21120261