Abstract
Roller beams are investigated by the finite-element method, using SolidWorks Simulation software. Static analysis of the beam’s stress–strain state reveals its inadequate rigidity. The basic structure of the beam is modified to address this problem. Analysis of the modernized beam design shows that its rigidity is adequate.
Similar content being viewed by others
REFERENCES
Mitin, E.V. and Sul’din, S.P., Hob strength in gear cutting, Russ. Eng. Res., 2018, vol. 38, no. 8, pp. 635–637.
Kuzin, E.K., Sul’din, S.P., Mitin, E.V., and Mitina, A.E., Calculation of the strength of a passenger trailer of general purpose loaded with a stack load during emergency braking, Avtom. Sovrem. Tekhnol., 2017, vol. 71, no. 12, pp. 537–539.
Mitin, E.V., Sul’din, S.P., and Martyshkin, A.I., The choice of the rational shape of replaceable polyhedral plates of face mills based on statistical analysis of the stress–strain state, SAPR Graf., 2017, no. 1 (243), pp. 55–57.
Pasko, N.I. and Kartavtsev, I.S., A mathematical model of the process of changing the size of parts when turning a batch of parts, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2013, no. 4, pp. 206–240. https://library.ru/item.aspid=20164044.
Kuznetsova, S.V. and Simakov, A.L., Mathematical model of the process of adaptation of the position of a part in the automated assembly, Sborka Mashinostr., Priborostr., 2012, no. 5 (142), pp. 15–20. https://library.ru/item.aspid=18751174.
Mitin, E.V. and Sul’din, S.P., Hob strength in gear cutting, Russ. Eng. Res., 2018, vol. 38, no. 8, pp. 635–637.
Mitin, E.V., Sul’din, S.P., Grigor’ev, A.V., and Okunev, D.V., Design of helical drills with channels for coolant supply, Russ. Eng. Res., 2019, vol. 39, no. 6, pp. 520–522.
Mitin, E.V., Sul’din, S.P., and Kalyakulin, S.Yu., Calculation of the strength of a general-purpose light trailer in the starting and turning modes, Avtom. Prom-st’, 2019, no. 3, pp. 33–36.
Kalyakulin, S.Yu., Mitin, E.V., and Sul’din, S.P., Models of manufacturing processes based on set theory, Russ. Eng. Res., 2021, vol. 41, no. 4, pp. 312–314.
Kalyakulin, S.Yu., Kuz’min, V.V., Mitin, E.V., and Sul’din, S.P., Automated design of information processing in preproduction, Russ. Eng. Res., 2020, vol. 40, no. 5, pp. 413–415.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kalyakulin, S.Y., Martyshkin, A.P., Mitin, E.V. et al. Design of Roller Beams Using SolidWorks Software. Russ. Engin. Res. 41, 1239–1241 (2021). https://doi.org/10.3103/S1068798X21120212
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21120212