Abstract
The existing method of calculating the working temperature of a gear housing is refined by taking account of the contact thermal conductivity, which depends on the materials used in the housing and the frame, the machining quality of the supporting surfaces, and the tightening of the screws that attach the housing to the frame. As an example, the housing temperature of a worm gear is calculated.
Similar content being viewed by others
REFERENCES
Reshetov, D.N., Detali mashin (Machine Parts), Moscow: Mashinostroenie, 1989.
Shlykov, Yu.P., Ganin, G.A., and Tsarovskii, S.N., Kontaktnoe termicheskoe soprotivlenie (Contact Thermal Resistance), Moscow: Energiya, 1977.
Demkin, N.B. and Ryzhov, E.V., Kachestvo poverkhnosti i kontakt detalei mashin (Surface Quality and Contact of Machine Parts), Moscow: Mashinostroenie, 1981.
Ivanov, A.S. and Izmailov, V.V., Calculation of contact deformation in machine engineering, Trenie Smazka Mash. Mekh., 2006, no. 8, pp. 3–10.
Ivanov, A.S., Konstruirovanie mashin. Istoki osnov. Chast’ 1. Prochnost’, zhestkost’, nadezhnost’: Uchebnoe posobie dlya vuzov (Basic Principles of Machine Design, Part 1: Durability, Rigidity, and Reliability: Manual for higher Education Institutions), St. Petersburg: Politekhnika, 2021.
Demkin, N.B. and Izmailov, V.V., The contact interaction of machine parts, Vestn. Mahsinostr., 2008, no. 10, pp. 28–32.
Ivanov, A.S. and Izmailov, V.V., Thermal conductivity of a plane joint, Russ. Eng. Res., 2009, vol. 29, no. 7, pp. 671–673.
Sokolov, Yu.N., Experimental study of the thermal conductivity of joints, Trudy Vserossiiskoi nauchno-tekhnicheskoi konferentsii “Mashinosvedenie i detail mahsin,” Moskva, 10–12 oktyabrya 2008 g. (Proc. All-Russ. Sci.-Tech. Conf. “Machine Science and Mahcine Parts,” Moscow, October 10–12, 2008), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2008.
Popov, V.L., Mekhanika kontaktnogo vzaimodeistviya i fizika treniya. Ot nanotribologii do dinamiki zemlyatresenii (Contact Mechanics and Physics of Friction: From Nanotribology to Earthquake Dynamics), Moscow: Fizmatlit, 2013.
Thomas, T.R. and Probert, S.D., Correlations for thermal contact conductance in vacuo, J. Heat Transf., 1972, vol. 94, no. 3, pp. 276-280.
Ivanov, A.S., Konstruirovanie mashin. Istoki osnov. Uchebnoe posobie dlya vuzov (Basic Principles of Machine Design: Manual for higher Education Institutions), St. Petersburg: Politekhnika, 2020.
Ivanov, A.S. and Goncharov, S.Yu., Wear and efficiency of worm gears with running-in, Russ. Eng. Res., 2021, vol. 41, no. 8, pp. 697–700.
Fomin, M.V., Worm-gear drive, Spravochnik. Inzh. Zh., 2011, no. 4.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Ivanov, A.S., Murkin, S.V. Refined Working-Temperature Calculation of Gears, Taking Account of Contact Thermal Conductivity. Russ. Engin. Res. 41, 994–998 (2021). https://doi.org/10.3103/S1068798X21110101
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21110101