Abstract
A method is developed for optimizing surface machining plans on the basis of a mathematical model in which the influence of the diameter in each pass on the dimensional precision is taken into account in multipass surface machining on multispindle automatic lathes. That permits calculation of the number of operations, the cutting depth in each pass, and the intermediate quality classes corresponding to maximum machining productivity in automatic lathes.
Similar content being viewed by others
REFERENCES
Yusubov, N.D., Bogatenkov, S.A., and Badalova, B.B., Specific multi-tool turning, Materialy Vtoroi Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Problemy metallurgii i materialovedenie” (Proc. Second Int. Sci.-Tech. Conf. “Metallurgy and Materials Science”), Baku, 2017, pp. 340–346.
Yusubov, N.D., Bogatenkov, S.A., and Mammadov, P.V., Surface treatment on modern CNC machines, Materialy Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Izmerenie i kachestvo: problemy i perspektivy” (Proc. Int. Sci.-Tech. Conf. “Measurement and Quality: Problems and Prospects”), Baku, 2018, pp. 121–125.
Langelaar, M., Topology optimization for multi-axis machining, Comput. Methods Appl. Mech. Eng., 2019, vol. 351, pp. 226–252.
Vijay, S. and Krishnaraj, V., Machining parameters optimization in end milling of Ti–6Al–4V, Procedia Eng., 2013, vol. 64, pp. 1079–1088.
Park, H.-S., Qi, B., Dang, D.-V., and Park, D.Y., Development of smart machining system for optimizing feedrates to minimize machining time, J. Comput. Des. Eng., 2018, vol. 5, no. 3, pp. 299–304.
Petunin, A.A. and Stylios, C., Optimization model of tool path problem for CNC Sheet metal cutting machines, IFAC-Papers OnLine, 2016, vol. 49, no. 12, pp. 23–28.
Pritchard, T., Smith, C., Ghadbeigi, H., et al., Modeling orthogonal and oblique cutting via discontinuity layout optimization, Procedia CIRP, 2019, vol. 82, pp. 37–42.
Kuntoğlu, M. and Sağlam, H., Investigation of progressive tool wear for determining of optimized machining parameters in turning, Measurement, 2019, vol. 140, pp. 427–436.
Chávez-García, H. and Castillo-Villar, K.K., Simulation-based model for the optimization of machining parameters in a metal-cutting operation, Simul. Model. Pract. Theory, 2018, vol. 84, pp. 204–221.
Hu, L., Tang, R., Cai, W., et al., Optimisation of cutting parameters for improving energy efficiency in machining process, Rob. Comput.-Integr. Manuf., 2019, vol. 59, pp. 406–416.
Pereverzev, P.P. and Akintseva, A.V., Automatic cycles multiparametric optimization of internal grinding, Procedia Eng., 2015, vol. 129, pp. 121–126.
Kovan, V.M., Osnovy tekhnologii mahsinostroeniya (Fundamentals of Machine Engineering Technology), Moscow: Mashgiz, 1959.
Ksilova, A.G., Spravochnik tekhnologa-mahsinostritelya (Handbook of Machine Engineer), Moscow: Mashinostroenie, 1986.
Koshin, A.A. and Yusubov, N.D., Elements of the matrix theory of multi-tool machining accuracy in spatial adjustments, Vestn. Mashinostr., 2013, no. 9, pp. 13–17.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Bogatenkov, S.A., Sazonova, N.S., Yusubov, N.D. et al. Increasing the Productivity of Multitool Machining on Automated Lathes by Optimizing the Machining Plan. Russ. Engin. Res. 41, 1071–1074 (2021). https://doi.org/10.3103/S1068798X21110046
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21110046