Abstract
The formulas here proposed may be used to take account of how the hardening of deformable material affects not only the stress state and forces in extrusion but also the results of the process.
Similar content being viewed by others
REFERENCES
Vorontsov, A.L., Stamping of nonuniform channels. 4. Deformed state of the workpiece on channel extrusion. 4.1. Deformation in the region of wall formation, Russ. Eng. Res., 2021, vol. 41, no. 8, pp. 714–718.
Vorontsov, A.L., Stamping of nonuniform channels. 4. Deformed state of the workpiece on channel extrusion. 4.2. Deformation under the end of the punch, Russ. Eng. Res., 2021, vol. 41, no. 9, pp. 820–823.
Vorontsov, A.L., Stamping of nonuniform channels. 3. Forces and shape changes in channel extrusion. 3.1. Kinematic and stress state of workpiece, Russ. Eng. Res., 2021, vol. 41, no. 6, pp. 519–524.
Vorontsov, A.L., Teoriya i raschety protsessov obrabotki metallov davleniem (Theory and Calculations of Metal Forming by Pressure), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014, vol. 1.
Vorontsov, A.L., Stamping of nonuniform channels. 3. Forces and shape changes in channel extrusion. 3.2. Determination of the extrusion force, maximum pressure on the matrix wall and the heights of the resulting walls taking into account the elastic deformation of the matrix, Vestn. Mashinostr., 2021, no. 4, pp. 63–69.
Vorontsov, A.L., Guidelines for the approximation of hardening curves, Proizvod. Prokata, 2001, no. 3, pp. 21–25.
Dmitriev, A.M. and Vorontsov, A.L., Approximation of curves of metal hardening, Kuznechno-Shtampovochnoe Proizvod., 2002, no. 6, pp. 16–22.
Vorontsov, A.L., Stamping of nonuniform channels. 2. Theoretical analyses of nonuniform-channel extrusion: a review, Russ. Eng. Res., 2021, vol. 41, no. 7, pp. 410–415.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Vorontsov, A.L. Stamping of Nonuniform Channels. 4. Deformed State of the Workpiece on Channel Extrusion. 4.3. Taking Account of Hardening. Russ. Engin. Res. 41, 924–926 (2021). https://doi.org/10.3103/S1068798X21100300
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21100300