Abstract
A nondestructive method is proposed for determining the endurance limit of gear teeth in flexure on the basis of elastoplastic indenter introduction in a sample. Experiments confirm the practical utility of the method.
Similar content being viewed by others
REFERENCES
GOST (State Standard) 21354–87: Cylindrical Evolvent Gears of External Engagement. Strength Calculation, Moscow: Izd. Standartov, 1989.
GOST (State Standard) 25.502–79: Strength Analysis and Testing in Machine Building. Methods of Metals Mechanical Testing. Methods of Fatigue Testing, Moscow: Izd. Standartov, 1981.
Shanyavskii, A.A. and Bannov, M.D., RF Patent 2461808, 2012.
Birger, I.A., Shorr, B.F., and Iosilevich, G.B., Raschet na prochnost’ detalei mahsin: Spravochnik (Calculation for the Strength of Machine Parts: Handbook), Moscow: Mashinostroenie, 1993.
Anur’ev, V.I., Spravochnik konstruktora-mashinostroitelya (Handbook of Machine Engineer), Zhestkova, I.N., Ed., Moscow: Mashinostroenie, 2006, vols. 1–2.
Markovets, M.P., Opredelenie mekhanicheskikh svoistv metallov po tverdosti (Determination of Mechanical Properties of Metals by Hardness), Moscow: Mashinostroenie, 1979.
Matyunin, V.M., Indentirovanie v diagnostike mekhanicheskikh svoistv materialov (Indentation in the Diagnostics of Mechanical Properties of Materials), Moscow: Mosk. Energ. Inst., 2015.
Matlin, M.M., Mozgunova, A.I., Kazankina, E.N., and Kazankin, V.A., Metody nerazrushayushchego kontrolya prochnostnykh svoistv detalei mahsin (Nondestructive Testing of Strength Properties of Machine Parts), Moscow: Innovatsionnoe Mashinostroenie, 2019.
Fridman, Ya.B., Mekhanicheskie svoistva metallov (Mechanical Properties of Metals), Moscow: Mashinostroenie, 1974.
Matlin, M.M., Mozgunova, A.I., Kazankina, E.N., and Kazankin, V.A., RF Patent 2700328, 2019.
GOST (State Standard) 18835–73: Metals. Plastic Hardness Measurement, Moscow: Izd. Standartov, 1974.
GOST (State Standard) 1497–84: Metals. Methods of Tension Test, Moscow: Izd. Standartov, 1985.
Slavskii, Yu.I. and Matlin, M.M., Determination of the temporal tensile strength of metals using the parameters of elastoplastic fitting of a spherical indenter, Zavod. Lab., 1993, no. 5, pp. 35–37.
Chernavskii, S.A., Snesarev, G.A., Kozintsev, B.S., et al., Proektirovanie mekhanicheskikh peredach (Design of Mechanical Drives), Moscow: Infa-M, 2019.
Funding
Financial support was provided by the Russian Foundation for Basic Research alone (project 19-08-00049) and in collaboration with the Volgograd Regional Administration (project 19-48-340002 and application SP-253.2018.1 in competition SP-2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Matlin, M.M., Kaunov, A.M., Kazankin, V.A. et al. Ongoing Monitoring of Flexural Stress in Gear Teeth. Russ. Engin. Res. 41, 407–409 (2021). https://doi.org/10.3103/S1068798X21050117
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21050117