Abstract
The production of magnetically hard Fe–Cr–Co alloy components by an additive method—specifically, selective laser melting (SLM) of metal powder produced by atomization of melt—is considered. The structure and magnetic properties of the resulting samples are investigated. Their magnetic properties are superior to those of cast samples.
Similar content being viewed by others
REFERENCES
Shishkovskii, I.V., Osnovy additivnykh tekhnologii vysokogo razresheniya (Principles of High-Resolution Additive Technologies), St. Petersburg: Piter, 2016.
Additive Manufacturing for the Aerospace Industry, Froes, F. and Boyer, R., Eds., Amsterdam: Elsevier, 2019.
Advances in 3D Printing & Additive Manufacturing Technologies, Wimpenny, D.I., Pandey, P.M., and Kumar, L.J., Eds., Singapore: Springer-Verlag, 2017.
Popovich, A.A., Additive technologies as breakthrough solutions for creating advanced functional materials, Met. Sci. Heat Treat., 2020, vol. 62, no. 6, pp. 18–24.
Perevertov, V.P., Andronchev, I.K., and Abulkasimov, M.M., Processing of materials by concentrated energy flow, Nadezhnost’ Kach. Slozhn. Sist., 2015, vol. 11, no. 3, pp. 69–79.
Zhukov, A.S., Barakhtin, B.K., and Kuznetsov, P.A., Desublimation as a reason of material hardening during selective laser sintering, Fundam. Probl. Sovrem. Materialoved., 2018, vol. 15, no. 2, pp. 169–175.
Bartel, T., Guschke, I., and Menzel, A., Towards the simulation of Selective Laser Melting processes via phase transformation models, Comput. Math. Appl., 2019, vol. 78, no. 7, pp. 2267–2281.
Saeidi, K., Gao, X., Lofaj, F., Kvetková, L., and Shen, Z.J., Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting, J. Alloys Compd., 2015, vol. 633, pp. 463–469.
Hanzl, P. and Zetek, M., The influence of processing parameters on the mechanical properties of SLMP arts, Procedia Eng., 2015, vol. 100, pp. 1405–1413.
Abele, E., Stoffregen, H.A., Kniepkampap, M., et al., Selective laser melting for manufacturing of thin-walled porous elements, J. Mater. Process. Technol., 2015, vol. 215, pp. 114–122.
Barakhtin, B.K. and Chashnikov, V.F., Computer program for multifractal analysis of images of metals and alloys, Vopr. Materialoved., 2001, no. 4 (28), pp. 5–8.
Tarasova, T.V., Prospects of the use of laser radiation for raising the wear resistance of corrosion-resistant steels, Met. Sci. Heat Treat., 2010, vol. 52, no. 5, pp. 284–288.
Dilip, J.J.S., Zhang, S., Teng, C., et al., Of processing parameters on the evolution of melt pool, porosity, and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting, Prog. Additive Manuf., 2017, vol. 2, pp. 157–167.
Barakhtin, B.K., Zhukov, A.S., Deev, A.A., and Voznyuk, A.V., Effect of the chemical composition of powder stock on the strength of materials after selective laser melting, Met. Sci. Heat Treat., 2018, vol. 60, no. 5, pp. 387–392.
Grigorovich, V.K., Elektronnoe stroenie i termodinamika splavov zheleza (Electronic Structure and Thermodynamics of Iron Alloys), Moscow: Nauka, 1970.
Aganaev, Yu.P., Gur’ev, A.M., Lygdenov, B.D., and Shumchi, M., The stability of the shape of the interphase boundary during periodic crystallization of alloys affected by highly concentrated heat sources, Fundam. Probl. Sovrem. Materialoved., 2014, vol. 11, no. 1, pp. 115–119.
Funding
Financial support was provided by the Russian Ministry of Education and Science (grant RFMEFI62519X0046).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Zhukov, A.S., Kamynin, A.V., Gavrikov, I.S. et al. Multifractal Analysis and Magnetic Properties of Magnetically Hard Fe–Cr–Co Alloy Produced by Selective Laser Melting. Russ. Engin. Res. 41, 325–328 (2021). https://doi.org/10.3103/S1068798X21040250
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21040250