Abstract
Comparison of the capabilities of sheet stamping, extrusion, rolling, bending, and pressing indicates that extrusion is best for the manufacture of channels with elements of different thickness.
Similar content being viewed by others
REFERENCES
Vorontsov, A.L., Teoriya malootkhodnoi shtampovki (Theory of Low-Waste Forging), Moscow: Mashinostroenie, 2005.
Vorontsov, A.L., Teoriya shtampovki vydavlivaniem (Theory of Extrusive Stamping), Moscow: Mashinostroenie, 2004.
Dal’skii, A.M., Barsukova, T.M., Gavrilyuk, V.S., et al., Tekhnologiya konstruktsionnykh materialov (Technology of Construction Materials), Moscow: Mashinostroenie, 2005.
Perlin, I.L. and Reitbarg, L.Kh., Teoriya pressovaniya metallov (Theory of the Pressing of Metals), Moscow: Metallurgiya, 1975.
Kholodnaya ob’emnaya shtampovka: Spravochnik (Cold Bulk Stamping: A Handbook), Navrotskii, G.A., Ed., Moscow: Mashinostroenie, 1973.
Vorontsov, A.L., Approximation of hardening curves, Vestn. Mashinostr., 2002, no. 1, pp. 51–54.
Ovchinnikov, A.G., Osnovy teorii shtampovki vydavleniem na pressakh (Theoretical Principles of Extrusion on Presses), Moscow: Mashinostroenie, 1983.
Berezhnoi, V.L., Organizational and technical features of the production of aluminum pressed products in the Republic of Korea and Russia, Kuznechno-Shtampovochnoe Proizvod., 2004, no. 4, pp. 40–45.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Vorontsov, A.L. Stamping of Nonuniform Channels. 1. Comparison of Methods of Channel Production. Russ. Engin. Res. 41, 308–311 (2021). https://doi.org/10.3103/S1068798X21040249
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21040249