Abstract
The turning of Caprolon with a machining fluid is considered. If an aqueous water-repellent emulsion is supplied to the cutting zone in machining, the Caprolon absorbs less water, and the final surface quality is improved.
Similar content being viewed by others
REFERENCES
Erenkov, O.Yu. and Bogachev, A.P., Turning of polymers with pulsed electromagnetic irradiation of the workpiece, Russ. Eng. Res., 2016, vol. 36, no. 6, pp. 466–468.
Erenkov, O.Yu., Ivakhnenko, A.G., Anikeeva, O.V., and Oleinik, A.V., Stable turning of fluoroplastic workpieces, Russ. Eng. Res., 2020, vol. 40, no. 2, pp. 133–136.
Bartenev, G.M., Prochnost’ i mekhanizm razrusheniya polimerov (Strength and Mechanism of Destruction of Polymers), Moscow: Khimiya, 1984.
Kartashov, E.M., Tsoi, B., and Shevelev, V.V., Strukturno-statisticheskaya kinetika razrusheniya polimerov (Structural-Static Kinetics of Polymer Destruction), Moscow: Khimiya, 2002.
Stepanov, A.A., Obrabotka rezaniem vysokoprochnykh kompozitsionnykh materialov (Cutting of High-Strength Composite Materials), Leningrad: Mashinostroenie, 1987.
Erenkov, O.Yu. and Kozlova, M.A., RF Patent 2612283, 2017.
Vereshchaka, A.S. and Tret’yakov, I.P., Rezhushchii instrument s iznosostoikim pokrytiem (Cutting Tool with Wear-Resistant Coating), Moscow: Mashinostroenie, 1986.
Poletika, M.F., Kontaktnye nagruzki na rezhushchikh poverkhnostyakh instrumenta (Contact Loads on Cutting Surface Tool), Moscow: Mashinostroenie, 1969.
Erenkov, O.Yu., Kombinirovannye sposoby tokarnoi obrabotki polimernykh kompozitsionnykh materialov (Combined Methods of Turning of Polymer Composite Materials), Khabarovsk: Tikhookean. Gos. Univ., 2015.
Kabaldin, Yu.G. and Shpilev, A.M., Samoorganizuyushchiesya protsessy v tekhnologicheskikh sistemakh obrabotki rezaniem. Diagnostika i upravlenie (Self-organizing Processes in Cutting Systems: Diagnostics and Control), Vladivostok: Dal’nauka, 1998.
Funding
The reported study was funded by RFBR, project number 20-08-00039.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Erenkov, O.Y., Anikeeva, O.V., Ivakhnenko, A.G. et al. Turning of Caprolon with an Influx of Water-Repellent Emulsion. Russ. Engin. Res. 41, 333–336 (2021). https://doi.org/10.3103/S1068798X21040080
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21040080