Abstract
A method of preparing the programming conditions within CNC and PLC operating systems is proposed, along with elements implementing control programs in multifunctional industrial equipment. It proves effective to combine elements of parametric and graphical programming in the development of both CNC and PLC subprograms.
Similar content being viewed by others
REFERENCES
Gudko, N.I., Effective models and schemes of cyclic action digital devices, Russ. Technol. J., 2018, vol. 6, no. 3, pp. 16–30. https://doi.org/10.32362/2500-316X-2018-6-3-16-30
Kholopov, V.A., Specific application of timers in modern programmable logic controllers, Prom. ASU Kontrol., 2015, no. 9, pp. 46–49.
Kozak, N.V., Pushkov, R.L., and Evstafieva, S.V., Implementation of electroautomatics control tasks based on external computing modules soft PLC in the AxiOMA Control PCNC, Prom. ASU Kontrol., 2016, no. 7, pp. 3–9.
Pushkov, R., Salamatin, E., and Evstafieva, S., Method of developing parametric machine cycles for modern CNC systems using high-level language, MATEC Web Conf., 2018, vol. 224, art. ID 01116. https://doi.org/10.1051/matecconf/201822401116
Kurnasov, E.V., Creation of plastic zones and their cross sections in NC CAD equipment, Russ. Eng. Res., 2009, vol. 29, no. 2, pp. 191–193. https://doi.org/10.3103/S1068798X09020178
Kurnasov, E.V., Design of housing components in NCCAD system, Russ. Eng. Res., 2009, vol. 29, no. 8, pp. 841–847. https://doi.org/10.3103/S1068798X09080218
Krasheninnikov, A.I. and Kushnir, A.P., RF Patent 114632, 2012.
Vorobiev, E.I., Realization of a given relative motion of two rigid bodies by a two-armed robot, Mech. Solids, 2018, vol. 53, no. 2, pp. 221–227. https://doi.org/10.3103/S0025654418020139
Chizhikov, V.I., Kurnasov, E.V., and Petrov, A.B., Robot manipulator control with efforts stabilization in capture of object with fuzzy geometrical characteristic, Proc. 5th Int. Conf. on Industrial Engineering, Cham: Springer-Verlag, 2020, vol. 2, pp. 823–837. https://doi.org/10.1007/978-3-030-22063-1_88
Chizhikov, V.I., Control of the elastic kinematic connection of the articulated arm, Sborka Mashinostr., Priborostr., 2013, no. 7, pp. 3–8.
Vorobiev, E.I., Industrial robots in mechanical engineering, Sov. Eng. Res., 1982, vol. 2, no. 12, pp. 6–16.
Kholopov, V.A., Antonov, S.V., and Kashirskaya, E.N., Application of the digital twin concept to solve the monitoring task of machine-building technological process, Proc. 2019 Int. Russian Automation Conf. (RusAutoCon), Sochi: Russ. Sib. Sect., Inst. Electr. Electron. Eng., 2019, pp. 1–5. https://doi.org/10.1109/RUSAUTOCON.2019.8867800
Shmeleva, A.G., Ladynin, A.I., Talanova, Y.V., and Galemina, E.A., Manufacturing planning information system development, Proc. 2020 IEEE Conf. of Russian Young Researchers in Electrical and Electronic Engineering, St. Petersburg: Russ. North West Sect., Inst. Electr. Electron. Eng., 2018, pp. 366–369. https://doi.org/10.1109/EIConRus.2018.8317108
Romanov, A., Romanov, M., Kharchenko, A., and Kholopov, V., Unified architecture of execution level hardware and software for discretemachinery manufacturing control systems, Proc. 14th IEEE Student Conf. on Research and Development “Advancing Technology for Humanity (SCOReD 2016),” Piscataway, NJ: Inst. Electr. Electron. Eng., 2016, no. 7810088. https://doi.org/10.1109/SCORED.2016.7810088
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Bugrov, Y.N., Kurnasov, E.V. Analysis of Cyclic Automatic Systems in Programming Multifunctional Equipment for CNC and PLC Systems. Russ. Engin. Res. 41, 302–307 (2021). https://doi.org/10.3103/S1068798X21040067
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21040067