Abstract
The pressure between a shaft and a reinforced rubber cuff (a lip seal) is considered. An algorithm is derived for calculating the contact pressure, taking account of the properties of the material, the thickness of the cuff’s active section, its inclination to the shaft, the spring’s tensile force, and the geometric parameters of the cuff’s free section.
Similar content being viewed by others
REFERENCES
Leonov, O.A. and Shkaruba, N.Zh., A parametric failure model for the calculation of the fit tolerance of joints with clearance, J. Frict. Wear, 2019, vol. 40, no. 4, pp. 332–336.
Leonov, O.A., Shkaruba, N.Zh., and Vergazova, Yu.G., Determining the tolerances in fitting for joints with interference, Russ. Eng. Res., 2019, vol. 39, no. 7, pp. 544–547.
Erokhin, M.N., Leonov, O.A., Kataev, Yu.V., and Mel’nikov, O.M., Tightness and leakage in applying reinforced rubber sleeves to shafts, Russ. Eng. Res., 2019, vol. 39, no. 6, pp. 459–462.
Erohin, M., Leonov, O., Kataev, U., and Vergazova, U., Calculation of fits for cylindrical connections with key for reducers in agricultural machinery, Proc. 18th Int. Sci. Conf. Engineering for Rural Development, Jelgava: Latvia Univ. Life Sci. Technol., 2019, pp. 469–474.
Leonov, O.A. and Vergazova, Yu.G., Implementation of theoretical research of shaft–keyed sleeve joint precision parameters, Vestn. Mosk. Gos. Agroinzh. Univ., 2015, no. 5, pp. 41–47.
Kondakov, L.A., Golubev, A.I., Ovander, V.B., et al., Uplotneniya i uplotnitel’naya tekhnika: Spravochnik (Seals and Sealing Technology: Handbook), Moscow: Mashinostroenie, 1986.
Makarov, G.V., Uplotnitel’nye ustroistva (Sealing Equipment), Leningrad: Mashinostroenie, 1973.
Kraev, M.V., Ovsyannikov, B.V., and Shapiro, A.S., Gidrodinamicheskie radial’nye uplotneniya vysokooborotnykh valov (Hydrodynamic Radial Sealants of High-Speed Shafts), Moscow: Mashinostroenie, 1976.
Timoshenko, S.P. and Goodyear, J., Theory of Elasticity, New York: McGraw–Hill, 1970.
Bezukhov, N.I. and Luzhin, O.V., Prilozhenie metodov teorii uprugosti i plastichnosti k resheniyu zadach (Implementation of Methods of the Theory of Elasticity and Plasticity to Problem Solution), Moscow: Vysshaya Shkola, 1974.
Solyanik-Krassa, K.V., Osesimmetrichnaya zadacha teorii uprogosti (Axisymmetric Problem of Elasticity Theory), Moscow: Stroiizdat, 1987.
Bodunov, N.M. and Druzhinin, G.V., One solution of an axisymmetric problem of the elasticity theory for a transversely isotropic material, J. Appl. Mech. Tech. Phys., 2009, vol. 50, no. 6, pp. 982–988.
Filin, A.P., Prikladnaya mekhanika tverdogo deformiruemogo tela (Applied Mechanics of Rigid Deformable Body), Moscow: Nauka, 1975, vol. 1.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Erokhin, M.N., Belov, M.I. & Mel’nikov, O.M. Contact Pressure of a Rubber Cuff on a Shaft. Russ. Engin. Res. 41, 115–122 (2021). https://doi.org/10.3103/S1068798X21020052
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21020052