Abstract
The stress–strain state of hydraulic drives is simulated. As an example, the pumping unit of the NP-112 hydraulic pump is considered.
Similar content being viewed by others
REFERENCES
Butrukhadze, R.D., Chibirova, L.Kh., and Kalaev, S.S., Operational reliability of hydraulic drives, in Studencheskaya nauka—agropromyshlennomu kompleksu (Student’s Science for Agroindustrial Complex), Vladikavkaz: Gorsk. Gos. Agrar. Univ., 2016, no. 53, pp. 35–36.
Gulyaev, A.P., Metallovedenie (Metal Science), Moscow: Metallurgiya, 1986.
Sagdeeva, Yu.A., Kopysov, S.P., and Novikov, A.K., Vvedenie v metod konechnykh elementov: Metodicheskie posobie (Introduction into the Finite Element Methods: Practical Guide), Izhevsk: Udmurt. Gos. Univ., 2011.
Nazarov, D., Overview of modern finite element analysis software. https://sapr.ru/article/6797. Accessed December 20, 2019.
Semenov, A.P., Kovsh, I.B., Petrova, I.M., et al., Metody i sredstva uprochneniya poverkhnostei detalei mashin kontsentrirovannym potokom energii (Methods and Tools for Hardening of Machine Part Surfaces by Concentrated Energy Flow), Moscow: Nauka, 1992.
Denisov, L.V., Siluyanova, M.V., Kuritsyna, V.V., and Kuritsyn, D.N., Uniform electrospark surface hardening of airplane-engine parts, Russ. Eng. Res., 2020, vol. 40, no. 3, pp. 270–273.
GOST (State Standard) 30480–97: Products Wear Resistance Assurance. Methods of Wear Resistance Tests. General Requirements, Moscow: Izd. Standartov, 1998.
Senin, P.V., Stolyarov, A.V., Zemskov, A.M., and Ionov, P.A., Study of the stress-strain state in the joints of the volumetric hydraulic drive, Remont. Vosstanov., Mod., 2015, no. 2, pp. 32–36.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Ionov, P.A., Stolyarov, A.V. & Zemskov, A.M. Stress–Strain State of Hydraulic Drives. Russ. Engin. Res. 40, 1078–1080 (2020). https://doi.org/10.3103/S1068798X20120321
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20120321