Abstract
A refined model is derived for the burnishing forces on hollow cylindrical workpieces when using a tool with regular microgeometry and metal-cladding lubricant. These conditions permit wear-free operation with Garkunov–Kragel’skii friction.
Similar content being viewed by others
REFERENCES
Proskuryakov, Yu.G. and Evstigneev, E.A., Mandrelling of bushing holes with hydraulic backpressure, Mashinostroitel’, 1973, no. 3, pp. 35–36.
Proskuryakov, Yu.G., Romanov, V.N., and Isaev, A.N., Ob”emnoe dornovanie otverstii (Volumetric Mandrel Drilling), Moscow: Mashinostroenie, 1984.
Yanchenko, I.I., Tarasov, V.V., and Sivtsev, N.S., Tekhnologicheskie osnovy obrabotki tochnykh otverstii dornovaniem. Chast’ 1. Teoriya upravleniya kontaktno-kinematicheskimi usloviyami pri dornovanii (Technological Principles for Machining of Precise Holes Mandrelling, Part 1: Control Theory of Contact-Kinematic Conditions of Mandrelling), Izhevsk: Inst. Prikl. Mekh., Ural. Otd., Ross. Akad. Nauk, 2002.
Shchedrin, A.V., Kostryukov, A.A., and Chikhacheva, N.Yu., Artificial technological intelligence as an ideological basis for a general system of materials processing methods, Uprochnyayushie Tekhnol. Pokrytiya, 2015, no. 6, pp. 20–26.
Shchedrin, A.V., Ul’yanov, V.V., Bekaev, A.A., et al., Tribology as a fundamental basis for systems design of competitive technological objects, Remont, Vosstanov., Modernizatsiya, 2009, no. 4, pp. 15–20.
Shchedrin, A.V., Ul’yanov, V.V., Bekaev, A.A., and Chikhacheva, N.Yu., Efficient hole broaching with regularized surface microgeometry of the deforming elements, Russ. Eng. Res., 2009, vol. 29, no. 9, pp. 911–915.
Shchedrin, A.V., Gavrilov, S.A., and Zinin, M.A., Optimization of the formulation of metal-cladding lubricants for combined mandrel drilling in billets from non-grinded nonferrous alloys, Vestn. Mahsinostr., 2012, no. 9, pp. 76–79.
Zinin, M.A., Gavrilov, S.A., Shchedrin, A.V., et al., Influence of metal-cladding addivite valena on combined machining, Russ. Eng. Res., 2011, vol. 31, no. 9, pp. 880–884.
Shchedrin, A.V., Mel’nikov, E.L., Zinin, M.A., et al., Influence of the composition of metal-cladding lubricant on the characteristics of combined punching of holes in billets from LS59-1 brass, Remont, Vosstanov., Modernizatsiya, 2017, no. 1, pp. 27–34.
Shchedrin, A.V., Skoromnov, V.M., Ul’yanov, V.V., et al., Improving the use of lubricant and coolant fluids in machining, Russ. Eng. Res., 2006, vol. 26, no. 10, pp. 38–39.
Shchedrin, A.V. and Tanengol’ts, A.B., Improvement of the characteristics of a tool for deforming-smoothing punching of holes, Mashinostroitel’, 2002, no. 11, pp. 20–23.
Shchedrin, A.V., Kostryukov, A.A., Chikhacheva, N.Yu., et al., Technological capabilities of the method of combined punching of holes with back pressure of metal-cladding lubricants, Sborka Mashinostr., Priborostr., 2016, no. 9, pp. 30–35.
Garkunov, D.N., Mel’nikov, E.L., Babel’, V.G., et al., Tribologiya na osnove samoorganizatsii (Tribology Based on Self-Organization), Saarbrucken: LAP LAMBERT Academic, 2015.
Shchedrin, A.V. and Kostryukov, A.A., The use of tribotechnologies based on self-organization for systemic improvement of cold plastic deformation, Uprochnyayushie Tekhnol. Pokrytiya, 2017, vol. 13, no. 11, pp. 495–499.
Shchedrin, A.V., Klimochkin, K.O., Bekaev, A.A., et al., Mathematical model for predicting the forces of mandrel drilling with a tool with regular surface microgeometry in conditions of back pressure of metal-cladding lubricants, Sborka Mashinostr.,Priborostr., 2019, vol. 20, no. 2, pp. 71–76.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Shchedrin, A.V., Aleshin, V.F., Bekaev, A.A. et al. Hybrid Burnishing of Cylindrical Workpieces with a Modified Hole Surface. Russ. Engin. Res. 40, 852–856 (2020). https://doi.org/10.3103/S1068798X20100251
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20100251