Abstract
A smoothing tool is developed for commutator plates in electric motors. The dependence of the surface roughness on the applied tool force is established.
Similar content being viewed by others
REFERENCES
Pravila remonta elektricheskikh mashin elektropodvizhnogo sostava (v redaktsii Ukazanii MPS Rossii ot 17.12.1996 no. N-1110u i ot 15.12.1997 g., no. K-1426u) (Instruction for Reparation of Electric Machines of Electric Rolling Stock (in Edition of Directions of the Ministry of Railways of the Russian Federation No. N-1110u of December 17, 1996 and No. K-1426u of December 15, 1997)), Moscow: Minist. Putei Soobshch. Rossii, 1997.
Elektrovozy VL10 i VL10U. Rukovodstvo po ekspluotatsii (Electric Locomotives VL10 and VL10U: Operation Manual), Kiknadze, O.A., Ed., Moscow: Mashinostroenie, 1981.
Belan, D.Yu., Otradnova, A.O., Khaseinov, K.B., et al., The use of surface plastic deformation in the reparation of electric DC machines, Materialy I Mezhdunarodnoi nauchno-prakticheskoi konferentsii “Bezopasnost’ i proektirovanie konstruktsii v mashinostroenii i stroitel’stve” (Proc. I Int. Sci.-Pract. Conf. “Safety and Design of Constructions in Machine Engineering and Building Industry”), Kursk: Yugo-Zap. Gos. Univ., 2013, pp. 66–70.
Belan, D.Yu., Kazadaev, M.V., and Vintenko, R.V., Development of technology and acessories for plastic deformation of the working surface of the collectors of electrical machines, Materialy III Vserossiiskoi konferentsii “Teoriya i praktika uspekha” (Proc. III All-Russ. Conf. “Theory and Practice of Success”), Omsk: Omsk. Gos. Univ. im. F.M. Dostoevskogo, 2015, pp. 138–141.
Belan, D.Yu., Petukhov, D.A., Dyundin, V.V., et al., Selection of processing modes for the diamond smoothing of collectors of electrical machines, Materialy nauchno-prakticheskoi konferentsii “Innovatsionnye proekty i tekhnologii v obrazovanii, promyshlennosti i na transporte” (Proc. Sci.-Pract. Conf. “Innovative Projects and Technologies in Education, Industry, and Transport”), Omsk: Omsk. Gos. Univ. Putei Soobshch., 2014, pp. 340–345.
Balandin, V.M. and Gur’ev, A.V., The effect of surface plastic deformation on the wear resistance of normalized steel, Tr. Vogograd. Politekh. Inst., 1975, no. 7, pp. 9–17.
Veitsman, M.G. and Vainshtein, V.G., Hardening of titanium alloys by surface plastic deformation, Vestn. Mashinostr., 1975, no. 9, pp. 73–75.
Dubenko, V.V., Diamond smoothing of machine part, Mashinostroitel’, 1974, no. 34, pp. 36–37.
Belan, D.Yu., Burnyshev, T.A., Petukhov, D.A., and Ivashchenko, E.A., RF Patent 133457, 2013.
Belan, D.Yu., Kuznetsov, A.A., Otradnova, A.O., Kubrina, T.V., and Kubrina, I.V., RF Patent 150479, 2015.
Torbilo, V.M., Almaznoe vyglazhivanie (Diamond Smoothing), Moscow: Mashinostroenie, 1972.
Golovan’, A.Ya., Granovskii, E.G., and Mashkov, V.N., Almaznoe tochenie i vyglazhivanie (Diamond Turning and Smothing), Moscow: Mashinostroenie, 1976.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Belan, D.Y., Toder, G.B., Averkov, K.V. et al. Surface Plastic Deformation of Commutator Plates in Electric-Motor Repair. Russ. Engin. Res. 40, 654–657 (2020). https://doi.org/10.3103/S1068798X20080067
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20080067