Abstract
On the basis of recent information regarding conduction, analysis of heat transfer by the response function method is proposed. Comparison with the finite-element method confirms the high accuracy of the proposed approach.
Similar content being viewed by others
REFERENCES
Kosov, M.G., Kuznetsov, A.P., Tolkacheva, I.M., et al., Modelirovanie tochnosti tekhnologicheskogo oborudovaniya pri avtomatizirovannom proektirovanii (Modeling of Accuracy of Equipment during Automated Design), Moscow: Yanus-K, 2018.
Volkov, A.E. and Medvedev, V.I., Investigation of multi-pair contact solids with periodic structure, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 1 (32), pp. 21–26.
Kosov, M.G., Simanzhenkov, K.A., and Ametova, M.A., Comparative evaluation of the accuracy of the finite element method and the method of response functions, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2018, no. 3 (46), pp. 106–111.
Rivkin, A.V., Kosov, M.G., Sobolev, A.N., and Nekrasov, A.Ya., B-cell model for calculating rigidity of conical interface of tool shank in view error of its manufacture, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2017, no. 3 (42), pp. 31–35.
Kosov, M.G., Sobolev, A.N., and Nekrasov, A.Ya., The information structure of the system of non-solid modeling, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2015, no. 1 (32), pp. 108–111.
Kosov, M.G., Tsarev, G.I., Balabolin, V.N., et al., Planirovanie eksperimenta v raschete sobstvennykh deformatsii pri modelirovanii tochnosti tekhnologicheskogo oborudovaniya (Experiment Planning in Calculation of Own Deformations in the Modeling of Equipment Precision), Moscow: Yanus-K, 2017.
Kosov, M.G., Assessment of thermal deformations in automated engineering of machine tools, in Avtomatizirovannoe proektirovanie i proizvodstvo v mashinostroenii (Automated Design and Production in Machine Engineering), Moscow: Mashinostroenie, 1986.
Zienkiewicz, O.C., The Finite Element Method in Engineering Science, New York: McGraw-Hill, 1971.
Sheveleva, G.I., Teoriya formoobrazovaniya i kontakta dvizhushchikhsya tel (Theory of forming and Contact of Moving Bodies), Moscow: Mosk. Gos. Tekhnol. Univ., Stankin, 1999.
Shtaerman, I.Ya., Kontaktnaya zadacha teorii uprugosti (Contact Problem of the Theory of Elasticity), Moscow: Gostekhizdat, 1949.
Kuznetsov, A.P. and Koriath, H.-J., Development of a classification and generation approach for innovative technologies, Procedia Manuf., 2018, vol. 21, pp. 798–805.
Bushuev, V.V., Kuznetsov, A.P., Sabirov, F.S., et al., Precision and efficiency of metal-cutting machines, Russ. Eng. Res., 2016, vol. 36, no. 9, pp. 762–773.
Kuznetsov, A.P., Teplovoi rezhim metallorezhushchikh stankov (Thermal Regime of Metal-Cutting Machines), Moscow: Yanus-K, 2013.
Funding
This work was supported by the Russian President to encourage young scientists, grant MD-6629.2018.9.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Kosov, M.G., Kuznetsov, A.P., Kapitanov, A.V. et al. Analysis of Heat Transfer by the Response Function Method. Russ. Engin. Res. 40, 67–69 (2020). https://doi.org/10.3103/S1068798X20010104
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20010104