Abstract
Dynamic methods of calibrating automatic leak detectors and manometric monitoring instruments are considered. Attention focuses on chronometric and reduction methods of calibration, which are based on gas emission under pressure through active resistances, employing the frequency principle. High precision is ensured in that the results are independent of the temperature, the humidity, and the gas parameters. Calibration facilitates utilization of the instruments in mass production.
Similar content being viewed by others
REFERENCES
Nerazrushayushchii kontrol’: Spravochnik. Tom 2. Kniga 1. Radiatsionnyi kontrol’ (Nondestructive Testing: Handbook, Vol. 2, Book 1: Radiation Control), Klyuev, V.V., Ed., Moscow: Mashinostroenie, 2003.
Fudim, E.V., Pnevmaticheskaya vychislitel’naya tekhnika (Pneumatic Computational Equipment), Moscow: Nauka, 1973.
Zalmanzon, L.A., Protochnye elementy pnevmaticheskikh priborov kontrolya i upravleniya (Flow-Through Elements of Pneumatic Devices for Regulation and Control), Moscow: Akad. Nauk SSSR, 1961.
Velichko, A.P., Features of calibration of infrared radiometers working in window of transparency of the atmosphere 8–14 microns, Russ. Technol. J., 2018, vol. 6, no. 6, pp. 55–65.
Sazhin, S.G. and Lemberskii, V.B., Avtomatizatsiya kontrolya germetichnosti izdelii massovogo proizvodstva (Automated Control of Tightness of Mass Products), Gorky: Volgo-Vyatskoe Knizhn. Izd., 1977.
Kholopov, V.A., Kashirskaya, E.N., Kushnir, A.P., et al., Development of digital machine-building production in the Industry 4.0 concept, J. Mach. Manuf. Reliab., 2018, vol. 47, no. 4, pp. 380–385.
Kashirskaya, E.N., Kurnasov, E.V., Kholopov, V.A., and Shmeleva, A.G., Methodology for assessing the implementation of the production process, Proc. 2017 IEEE 2nd Int. Conf. on Control in Technical Systems, CTS 2017, St. Petersburg: Inst. Electr. Electron. Eng., 2017, pp. 232–235. https://doi.org/10.1109/CTSYS.2017.8109533
Kurnasov, E.V. and Malyshkin, A.B., Control of the selective hydrogenation of acetylene compounds, Russ. Eng. Res., 2017, vol. 37, no. 5, pp. 393–396.
Chizhikov, V.I., Kurnasov, E.V., and Vorob’ev, E.I., Capture of an object on the basis of tactile surface recognition, Russ. Eng. Res., 2018, vol. 38, no. 4, pp. 251–255.
Chizhikov, V.I. and Kurnasov, E.V., Synthesis of an automatic control system for grip force stabilization of the object with fuzzy geometric characteristics, Avtom. Sovrem. Tekhnol., 2016, no. 2, pp. 3–10.
Evlampiev, A.I., Popov, E.D., Sazhin, S.G., and Sumkin, P.S., Techeiskanie: uchebnoe posobie (Leak Detection: Manual), Klyuev, V.V., Ed., Moscow: Spektr, 2011.
Kushnir, A.P., Simulation of passing through the armor, Russ. Technol. J., 2015, vol. 2, no. 4. pp. 116–126.
Leonov, L.B., RF Patent 2239807, 2004.
Moiseev, Yu.N. and Sumkin, P.S., RF Patent 159781, 2016.
Kubicki, M. and Maliński, M., The nondestructive thermoacoustic method of determination of the air-tightness of metal packagings of transistors, Proc. 19th Int. Workshop on Thermal Investigations of ICs and Systems (THERMINIC), Berlin: Inst. Electr. Electron. Eng., 2013, pp. 21–26.
Vinogradov, M.L., Kostrin, D.K., Karganov, M.V., and Tiskovich, V.Yu., How to choose a leak detection method, Proc. 2016 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW), St. Petersburg: Inst. Electr. Electron. Eng., 2016, pp. 100–104.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Asadova, Y.S., Makarov, V.A. Dynamic Calibration of Automatic Leak-Detection Instruments. Russ. Engin. Res. 40, 15–20 (2020). https://doi.org/10.3103/S1068798X20010049
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20010049