Abstract
A method is outlined for correcting bulk geometric errors of multicoordinate CNC equipment (machine tools, measuring machines, and instruments). In the present work, familiar methods of measuring the volume error are adapted for conditions in which load is applied to the object. As an example, experimental results are presented for the correction of the three-dimensional accuracy of the machine tool in the presence and absence of a load. Migration of the null point in the multicoordinate system under a static load is studied.
Similar content being viewed by others
REFERENCES
Grigoriev, S.N., Masterenko, D.A., Teleshevskii, V.I., and Emelyanov, P.N., Contemporary state and outlook for development of metrological assurance in the machine-building industry, Meas. Tech., 2013, vol. 55, no. 11, pp. 1311–1315.
Teleshevskii, V.I. and Grishin, S.G., Measuring information system for nanometrology, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2008, no. 2, pp. 33–40.
Grigoriev, S.N. and Teleshevskii, V.I., Measurement problems in technological shaping processes, Meas. Tech., 2011, vol. 54, no. 7, pp. 744–749.
Teleshevsky, V.I., Emelyanov, P.N., and Sokolov, V.A., Software correction of volumetric geometrical errors of multi-axis systems based on laser interferometric measurements, Russ. Eng. Res., 2017, vol. 37, no. 3, pp. 248–252.
Donmez, M.A., Blomquist, D.S., Hocken, R.J., et al., A general methodology for machine tool accuracy enhancement by error compensation, Precis. Eng., 1986, vol. 8, pp. 187–196.
Grigoriev, S.N., Teleshevsky, V.I., and Sokolov, V.A., Volumetric geometric accuracy improvement for multi-axis systems based on laser software error correction, Proc. Int. Conf. on Competitive Manufacturing “COMA’13,” January 30–February 1,2013, Stellenbosch: Stellenbosch Univ., 2013, pp. 301–306.
Teleshevskii, V.I. and Sokolov, V.A., Laser correction of geometric errors of multi-axis programmed-controlled systems, Meas. Tech., 2012, vol. 55, no. 5, pp. 535–541.
Teleshevskii, V.I., Measuring informatics in mechanical engineering, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2008, no. 1, pp. 33–38.
Teleshevskii, V.I., Measuring informatics in mechanical engineering, Part 2, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2008, no. 2, pp. 41–45.
Teleshevsky, V.I., Sokolov, V.A., and Pimushkin, Ya.I., Accuracy improvement of multi-axis systems based on laser correction of volumetric geometric errors, J. Phys.: Conf. Ser., 2018, vol. 998, no. 012034, pp. 1–6.
Teleshevskii, V.I., Sokolov, V.A., and Pimushkin, Ya.I., Accuracy improvement of multi-axis systems based on laser correction of volumetric geometric errors, Vestn. Mosk. Gos. Tekhnol. Univ., Stankin, 2018, no. 4 (47), pp. 99–104.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Teleshevskii, V.I., Pimushkin, Y.I. & Sokolov, V.A. Null-Point Migration of a Multicoordinate System under a Static Load. Russ. Engin. Res. 39, 1077–1079 (2019). https://doi.org/10.3103/S1068798X19120220
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19120220