Abstract
In the machining of steel, metal from the workpiece may build up on the tool’s cutting edge. The influence of such buildup on the roughness of the machined surface in the turning of 40Х steel is simulated. The cutting conditions and the tool geometry are found to affect the surface roughness. The adhesive properties of the machined material are also significant. Vibration in the machine tool does not have a statistically significant influence on the surface roughness. That may be attributed to the rigidity of the equipment employed.
Similar content being viewed by others
REFERENCES
Suslov, A.G., Kachestvo poverkhnostnogo sloya detalei mashin (The Quality of the Surface Layer of Machine Parts), Moscow: Mashinostroenie, 2000.
Bez”yazychnyi, V.F., Aver’yanov, I.N., and Kordyukov, A.V., Raschet rezhimov rezaniya: Uchebnoe posobie (Calculation of Cutting Modes: Manual), Rybinsk: Rybinsk. Gos. Aviats. Tekhnol. Univ., 2009.
Plotnikov, A.L. and Taube, A.O., Upravlenie rezhimami rezaniya na tokarnykh stankakh s ChPU: Monografiya (Control of Cutting Modes on CNC Machines: Monograph), Volgograd: Politekhnik, 2003.
Puertas Arbizu, I. and Luis Pérez, C.J., Surface roughness prediction by factorial design of experiments in turning processes, J. Mater. Process. Technol., 2003, vols. 143–144, pp. 390–396.
Wang, X., Kang, M., Fu, X., and Li, Ch., Predictive modeling of surface roughness in lenses precision turning using regression and support vector machines, Int. J. Adv. Manuf. Technol., 2016, vol. 87, pp. 1273–1281.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Tokarev, D.I., Drozdov, A.A., Sirotenko, L.D. et al. Surface Roughness of Steel in Turning with Metal Buildup on the Tool. Russ. Engin. Res. 39, 886–888 (2019). https://doi.org/10.3103/S1068798X19100253
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19100253