Abstract
A method is proposed for modeling the lost-wax casting of tool electrodes by means of fusible BrA9ZhZL copper-based alloy. The functionality of the casting system is analyzed. The heating and cooling of a ceramic mold is taken into account in visualizing the temperature fields. Sections where shrinkage pores may form in the casting are identified.
Similar content being viewed by others
REFERENCES
Kablov, E.N., Litye lopatki gazotubinnykh dvigatelei (splavy, tekhnologiya, pokrytiya) (Casted Blades for Gas Turbine Engines: Alloys, Technology, and Coatings), Moscow: Mosk. Inst. Stali Splavov, 2001.
Ivanov, V.N., Kazennov, S.A., Kurchman, B.S., et al., Lit’e po vyplavlyaemym modelyam (Casting in Melted Models), Shkleinik, Ya.I. and Ozerov, V.A., Eds., Moscow: Mashinostroenie, 1984.
Shumkov, A.A., Ablyaz, T.R., Kochneva, A.A., et al., Evolution of the error in the shape of the electrode-instrument using rapid prototyping technologies, Vestn. Permsk. Nats. Issled. Politekh. Univ., Mashinostr., Materialoved., 2017, vol. 19, no. 2, pp. 106–117.
Skrzypczak, T., Węgrzyn-Skrzypczak, E., and Sowa, L., Computer simulation of the solidification process including air gap formation, Arch. Foundry Eng., 2017, vol. 17, no. 4, pp. 147–150.
Sowa, L., Skrzypczak, T., and Kwiatoń, P., Analysis of temperature and velocity fields during filling of continuous casting mould, Arch. Foundry Eng., 2018, vol. 18, no. 1, pp. 115–118.
Funding
Financial support was provided by the Russian President in encouragement of young Russian scientists (grant MK-2072.2019.8).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Shumkov, A.A., Ablyaz, T.R., Muratov, K.R. et al. Predicting Metallic Defects in Casting BrA9ZhZL Alloy Tool Electrodes. Russ. Engin. Res. 39, 878–880 (2019). https://doi.org/10.3103/S1068798X19100241
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19100241