Abstract
The abrasive finishing of monocrystalline lithium niobate is considered. The action of abrasive grains on the surface of the workpiece creates a layer of disintegrated material. The depth F of the disintegrated layer may be calculated as F = 12h, where h is the height of the surface relief, corresponding to the roughness Rmax.
Similar content being viewed by others
REFERENCES
Vinokurov, V.M., Ardamatskii, A.L., and Popov, L.V., The structure of destructed layer, in Formoobrazovanie opticheskikh poverkhnostei (Forming of Optic Surfaces), Kumanin, K.G., Ed., Moscow: Oborongiz, 1962, pp. 7–57.
Bogomolov, N.I. and Bezolyuk, Yu.V., The depth of the deformed layer during microcutting by single abrasive grain, Sint. Almazy, 1970, no. 3, pp. 74–87.
Kashcheev, V.N., Abrazivnoe razrushenie tverdykh tel (Abrasive Destruction of Solids), Moscow: Nauka, 1970.
Ekobori, T., Fizika i mekhanika razrusheniya i prochnosti tverdykh tel (Physics and Mechanics of Destruction and Durability of Solids), Moscow: Metallurgiya, 1971.
Khrushchov, M.M. and Babichev, M.A., Patterns of scratching and grinding with fixed abrasive grains at low speed, in Vysokoproizvoditel’noe shlifovanie (High-Performance Grinding), Moscow: Akad. Nauk SSSR, 1962, pp. 18–24.
Kachalov, N.N., Tekhnologiya shlifovki i polirovki stekla (Technology of Grinding and Polishing of Glass), Moscow: Akad. Nauk SSSR, 1953.
Spravochnik optika-tekhnologa (Handbook of Optical Technologists), Okatov, M.A., Ed., St. Petersburg: Politekhnika, 2004.
Artemov, A.S., Polishing nanodiamonds, Phys. Solid State, 2004, vol. 46, no. 4, pp. 687–695.
Ardamatskii, A.L., Almaznaya obrabotka opticheskikh detalei (Diamond Processing of Optic Parts), Moscow: Mashinostroenie, 1978.
Kachalov, N.N., Tekhnologiya shlifovki i polirovki listovogo stekla (Grinding Technology and Polishing of Sheet Glass), Moscow: Akad. Nauk SSSR, 1958.
Aleinikov, F.K., Finishing processes, Zh. Tekh. Fiz., 1957, vol. 27, no. 129, p. 2725.
Funding
Financial support was provided by the Russian President in encouragement of young Russian scientists (grant MD-1779.2019.8).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Muratov, K.R., Ablyaz, T.R. & Gashev, E.A. Depth of the Disintegrated Layer in the Abrasive Finishing of Single Crystals. Russ. Engin. Res. 39, 875–877 (2019). https://doi.org/10.3103/S1068798X19100198
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19100198