Abstract
Algorithms for current stabilization in the control of contact welding are considered. The proposed method for specifying and maintaining the welding current permits correction of the thyristor firing angle by means of an approximate formula taking account of the measured current-pulse parameters in phase regulation. The proposed method simplifies the equipment and increases the efficiency of regulation.
Similar content being viewed by others
REFERENCES
Oborudovanie dlya kontaktnoi svarki: spravochnoe posobie (Equipment for Contact Welding: Handbook), Smirnov, V.V., Ed., St. Petersburg: Energoatomizdat, 2000.
Regulyatory kontaktnoi svarki mikroprotsessornye RKM-803UkhL4 i RKM-803-1UkhL4: pasport (Microprocessor Regulators of Contact Welding RKM-803UkhL4 and RKM-803-1UkhL4: A Pasport), St. Petersburg: Elektrik-MIKS, 2001.
Rys’kova, Z.A., Fedorov, P.D., and Zhemereva, V.I., Transformatory dlya elektricheskoi kontaktnoi svarki (Transformers for Electrical Contact Welding), Leningrad: Energoatomizdat, 1990.
Farrow, J.F., US Patent 4 851 635, 1989.
Aksel’rod, F.A., Ibragimov, U.U., Ioffe, Yu.E., Filippov, Yu.I., and Kholmyanskii, E.N., USSR Inventor’s Certificate no. 1281358, 1987.
Ioffe, Yu.E., Reznikov, B.N., Povstyan, V.I., Filippov, Yu.I., and Kholmyanskii, E.N., USSR Inventor’s Certificate no. 1816603, 1993.
Lankin, Yu.N., Semikin, V.F., and Baishtruk, E.N., Stabilization of the welding current of contact point machines in the voltage supply fluctuates, Avtom. Svarka, 2017, nos. 5–6, pp. 40–42.
Boilard, R.C., US Patent 5589088, 1996.
Klimov, A.S., Gerasimov, A.A., Antsiborov, A.N., and Goncharov, M.S., RF Patent 2311273, 2007.
Komirenko, A.V., Klimov, A.S., Klimov, V.S., and Antsiborov, A.N., Microprocessor control of contact welding, Avtom. Sovrem. Tekhnol., 2012, no. 9, pp. 3–10.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Klimov, A.S., Antsiborov, A.N., Klimov, V.S. et al. Current Regulation in Contact Welding. Russ. Engin. Res. 39, 766–771 (2019). https://doi.org/10.3103/S1068798X19090119
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19090119