Abstract
To improve the wear resistance of high-precision machine parts, a new technology has been developed: asymmetric uninterrupted lapping. The influence of its basic parameters on the surface microhardness is investigated. The optimal parameter values corresponding to maximum surface microhardness are determined.
Similar content being viewed by others
REFERENCES
Gafarov, A.M., Progressivnye metody mekhanicheskoi obrabotki (Progressive Machining Methods), in 2 vols., Baku: Nauka, 2001.
Gafarov, A.M., Sharifov, Z.Z., and Aliev, Ch.M., The surface roughness of parts threatened the asymmetrically non-splitting lapping, Vestn. Mashinostr., 2018, no. 2, pp. 77–82.
Elezavetin, M.A. and Satel’, E.A., Tekhnologicheskie sposoby povysheniya dolgovechnosti mashin (Technological Improvement of Machine Service Life), Moscow: Mashinostroenie, 1969.
Kudryavtsev, I.V., Saverin, M.M., and Ryavchenkov, A.V., Metody poverkhnostnogo uprochneniya detalei mashin (Surface Hardening of Machine Parts), Moscow: Mashgiz, 1949.
Kudryavtsev, I.V., Vnutrennie napryazheniya kak rezerv prochnosti v mashinostroenii (Internal Stresses as a Resource of Durability in Machine Engineering), Moscow: Mashgiz, 1951.
Khrul’kov, V.A., Golovan’, A.Ya., and Fedotov, A.A., Almaznye instrumenty v pretsizionnom priborostroenii (Diamond Tools in Precise Tool Making), Moscow: Mashinostroenie, 1977.
Khrul’kov, V.A. and Kovalev, A.A., Refining ceramics based on alumina and silicon carbide, in Abrazivno-almaznaya obrabotka i dovodochnye protsessy (Abrasive Diamond Processing and Finishing), Moscow: Mosk. Dom Nauchno-Tekh. Propag., 1966, pp. 186–197.
Gafarov, A.M., Suleimanov, P.G., Gafarov, V.A., and Kalbiev, F.M., Determination of rational parameters of technological operations in the processing of high-precision machine parts of operating in extreme conditions, Vestn. Azerb. Inzh. Akad., 2015, vol. 7, no. 4, pp. 50–58.
Gafarov, A.M., Aliev, Ch.M., and Kuliev, A.M., The operational changes in the quality of the surface layer of high-precision parts of ship machines and mechanisms processed by various methods, Vestn. Gos. Univ. Morsk. Rechn. Flota im. Adm. S.O. Makarova, 2017, vol. 9, no. 4, pp. 7752–7764.
Soler, Ya.I. and Nguen Van Kan, The shape accuracy of the tools in flat grinding by Horton Vitrim ring, Vestn. Mashinostr., 2016, no. 11, pp. 51–58.
Gafarov, A.M., Suleimanov, P.G., and Gafarov, V.A., Evaluation of the reliability of machines and equipment operated in extreme conditions, Tekhnol. Mashinostr, 2014, no. 7, pp. 40–44.
Sharifov, Z.Z., Aliev, Ch.M., and Kuliev, A.M., The influence of surface roughness on wear of the surface layer of parts of ship machines and mechanisms processed by various methods, Vestn. Gos. Univ. Morsk. Rechn. Flota im. Adm. S.O. Makarova, 2017, vol. 9, no. 6, pp. 1262–1272.
Suleimanov, P.G., Tribotekhnicheskie kharakteristiki detalei mahsin, ekspluatiruemykh v ekstremal’nykh usloviyakh (Tribological Properties of Machine Parts Operated in Extreme Conditions), Baku: Nauka, 2013.
Muratov, K.R. and Gashev, E.A., Honing methods of highly precision holes, Sovrem. Probl. Nauki Obraz., 2014, no. 5, pp. 44–48.
Dzhanakhmedov, A.Kh., Dyshin, O.A., and Dzhavadov, M.Ya., Sinergetika i fraktaly v tribologii (Synergetics and Fractals in Tribology), Baku: Nauka, 2014.
Gafarov, A.M., Suleimanov, P.G., and Gafarov, V.A., The quality of surfaces of parts machined by rotational honing and operated in extreme conditions, Vestn. Mashinostr., 2016, no. 11, pp. 63–68.
Gafarov, A.M., Suleimanov, P.G., and Gafarov, V.A., Effect of process parameters on wear of surface layer of machine parts used under extreme conditions, Chem. Petrol. Eng, 2013, vol. 49, nos. 3–4, pp. 201–205.
Gafarov, A.M., Suleimanov, P.G., Kalbiev, F.M., and Gafarov, V.A., The influence of the general parameters of the rotational processing on the surface quality of machine parts operated in extreme conditions, Tekhnol. Mashinostr, 2017, no. 4, pp. 17–24.
Nevzorov, V.N. and Sugak, E.V., Nadezhnost’ mahsin i oborudovanii (Reliability of Machines and Equipment), Krasnoyarsk: Sib. Gos. Tekh. Univ., 1998, part 1.
Gikhman, I.I., Skorokhod, A.V., and Yadrenko, M.I., Teoriya veroyatnostei i matematicheskaya statistika (Theory of Probability and Mathematical Statistics), Kiev: Vysshaya Shkola, 1988.
Ivashev-Misatov, O.S., Teoriya veroyatnostei i matematicheskaya statistika (Theory of Probability and Mathematical Statistics), Moscow: Nauka, 1979.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Gafarov, A.M., Sharifov, Z.Z. & Gafarov, V.A. Surface Microhardness of Parts Machined by Asymmetric Uninterrupted Lapping. Russ. Engin. Res. 39, 755–760 (2019). https://doi.org/10.3103/S1068798X19090065
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19090065