Abstract
The basing of parts is analyzed. The contact relations between the surfaces of parts are found to play a basing role. That leads to redundant basing. If that redundancy is taken into account, many problems affecting the quality, precision, and performance of machines may be eliminated.
Similar content being viewed by others
REFERENCES
Balakshin, B.S., Teoriya i praktika tekhnologii mahsinostroeniya. Kniga 1. Tekhnologiya stankostroeniya (Technological Theory and Practice of Machine Engineering, Book 1: Technology of Machine Engineering), Moscow: Mashinostroenie, 1982.
Reshetov, L.N., Samoustanavlivayushchiesya mekhanizmy: Spravochnik (Self-Induced Mechanisms: Handbook), Moscow: Mashinostroenie, 1991.
Krainev, A.F., Ideologiya konstruirovaniya (The Concept of Design), Moscow: Mashinostroenie, 2003.
Airapetov, E.L., Research works of the Mechanical Engineering Research Institute of the Russian Academy of Sciences in the field of machine acoustics, Vestn. Mashinostr., 1998, no. 12, pp. 24–31.
Airapetov, E.L., Kovalevskii, V.N., and Kuchkarov, U.Kh., Efficiency of a gear with elastic element, Izv. Vyssh. Uchebn. Zaved., Mashinostr., 1982, no. 3, pp. 2–5.
Litvinov, A.E., Improving tool life and cutting precision in metal-cutting band saws, Russ. Eng. Res., 2017, vol. 37, no. 1, pp. 70–71.
Taranenko, V.A., Processing of non-rigid parts with tensile force, Stanki Instrum., 1978, no. 8, pp. 33–35.
Ignatov, V.S., Axial fixing of the lead screw in the drives of CNC machines, Stanki Instrum., 1978, no. 11, pp. 16–19.
Bushuev, V.V., Redundant and missed links in machine designs, Stanki Instrum., 1990, no. 8, pp. 35–39.
Bushuev, V.V. and Molodtsov, V.V., Influence of the elastic properties of supply drives on their dynamic characteristics, Russ. Eng. Res., 2016, vol. 36, no. 11, pp. 940–947.
Mukhin, A.A., Kovalev, A.A., Vedin, A.N., and Simakov, A.A., Operational experience with linked-blade high-output gas-turbine, Strength Mater., 1978, vol. 10, no. 5, pp. 514–517.
Ogorodnikov, V.A., Experimental studies of the forming control of the holes in thin-walled cylinders during honing, Stanki Instrum., 2016, no. 12, pp. 31–36.
Vu Van Iip, The effect of skewing of the test system during dynamic tensile tests, Teor. Osnovy Inzh. Raschetov, 1982, vol. 104, no. 4, pp. 50–55.
Zheleznov, G.S. and Singeev, S.A., The effect of the rimering setting error on machining accuracy, Stanki Instrum., 1982, no. 9, pp. 25–26.
Zheleznov, G.S. and Shirokov, A.V., Influence of misalignment of the reamer and spindle axes on the precision of the machined hole, Russ. Eng. Res., 2016, vol. 36, no. 7, pp. 603–606.
Koroleva, E.M. and Kuchkina, N.A., Stability of location of axial tool, Stanki Instrum., 1997, no. 8, pp. 30–35.
Alekhin, A.G., Krylov, E.G., and Serdobintsev, Yu.P., Increasing the contact rigidity in shank attachment of cutting tools, Russ. Eng. Res., 2015, vol. 35, no. 11, pp. 855–858.
Bez”yazychnyi, V.F., Nepomiluev, V.V., and Semenov, A.N., Obespechenie kachestva izdelii pri sborke (Quality Maintenance of the Products in Assembly), Moscow: Spektr, 2012.
Semenov, A.N., Assembly of high-tech products using compensating effects, Sborka Mashinostr. Priborostr., 2006, no. 3, pp. 3–7.
Semenov, A.N. and Nepomiluev, V.V., Overcoming the negative consequences of over-basing of parts in assembled constructions, Vestn. Rybinsk. Gos. Aviats. Tekh. Univ. im. P.A. Solov’eva, 2018, no. 1 (40), pp. 25–30.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Bernard Gilbert
About this article
Cite this article
Semenov, A.N., Nepomiluev, V.V. Influence of the Interactions of Components on the Quality of Assembly. Russ. Engin. Res. 39, 609–611 (2019). https://doi.org/10.3103/S1068798X19070219
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X19070219